Fiesta-Si.com • View topic - any1 fitted a door skin?

View unanswered posts | View active topics

Board index » Technical Issues, Modifications, Insurance & Guides » Technical problems

All times are UTC [ DST ]

any1 fitted a door skin?

Moderator: FSi Moderators

Page 1 of 1

[ 16 posts ]

Print view

Author

Message

john_d

Post subject: any1 fitted a door skin?

Posted: Thu Mar 01, 2007 7:05 pm

FSI Poster

Joined: Fri Feb 09, 2007 8:33 pm
Posts: 983
Location: antartica
Drives:

could do with fitting 1 of these but it strikes me it might abe pretty difficult?

i assume u have to bent the edges to get it to fit? if so do u need some special tool/equipment?

Top

xmadxmoex

Post subject:

Posted: Thu Mar 01, 2007 8:39 pm

Banned Member

Joined: Sat Jun 03, 2006 11:48 am
Posts: 7294

Top

john_d

Post subject:

Posted: Thu Mar 01, 2007 8:56 pm

FSI Poster

Joined: Fri Feb 09, 2007 8:33 pm
Posts: 983
Location: antartica
Drives:

yeah i know m8 but my door pins are stuck, well and truley

Top

xmadxmoex

Post subject:

Posted: Thu Mar 01, 2007 8:59 pm

Banned Member

Joined: Sat Jun 03, 2006 11:48 am
Posts: 7294

hows a new door skin gonna help then mate?

Top

john_d

Post subject:

Posted: Thu Mar 01, 2007 9:09 pm

FSI Poster

Joined: Fri Feb 09, 2007 8:33 pm
Posts: 983
Location: antartica
Drives:

cause the outer skin is a bit rusted, rest of the door is fine, so i figure if i were to get a new skin, fold it at the edge where it meets the wing (essentially hooking it on), i could them fold along the rest of the edges

Top

xmadxmoex

Post subject:

Posted: Thu Mar 01, 2007 9:11 pm

Banned Member

Joined: Sat Jun 03, 2006 11:48 am
Posts: 7294

hmm possibly.. best bet id say would be to get another door from the scrappers, grind the hinges off on the car side of the one at the scrappers.. then you got more room to get the pins out.. chop the door hinges off your door leaving them on the car then you can drill out the pins and fit new door

(we had to do this on one of the race cars at a race meet.. so only had a few hours to do it

Top

happypaul

Post subject:

Posted: Thu Mar 01, 2007 10:52 pm

Donator? Ejaculator!

Joined: Thu Mar 30, 2006 1:23 pm
Posts: 11348
Location: Lincoln
Drives:

_________________
Daily isn't so Special. And it makes me sad.
Need space and time and I'll crack on with Jams si!

Catch me on Facebook as I'm rarely on here.

Top

JoshSi

Post subject:

Posted: Fri Mar 02, 2007 9:49 am

Poster

Joined: Thu Sep 07, 2006 4:32 pm
Posts: 71
Location: Leicester

_________________

Sig=Moe=Legend!

1.6 16v - Pipercross induction kit - 60mm Gmax springs & shocks - Cobra Monaco S seats - B&M Sports shifter.

Top

Escort Si-130

Post subject:

Posted: Fri Mar 02, 2007 9:53 pm

New Member

Joined: Thu Jan 18, 2007 11:27 pm
Posts: 16
Location: London

Door skin is aa waste of time. PLus you have to weld it onto the existing door.
Far easier to egt another door.

Top

john_d

Post subject:

Posted: Fri Mar 02, 2007 10:13 pm

FSI Poster

Joined: Fri Feb 09, 2007 8:33 pm
Posts: 983
Location: antartica
Drives:

Top

happypaul

Post subject:

Posted: Fri Mar 02, 2007 10:57 pm

Donator? Ejaculator!

Joined: Thu Mar 30, 2006 1:23 pm
Posts: 11348
Location: Lincoln
Drives:

_________________
Daily isn't so Special. And it makes me sad.
Need space and time and I'll crack on with Jams si!

Catch me on Facebook as I'm rarely on here.

Top

jdfiesta

Post subject:

Posted: Sat Mar 03, 2007 1:05 am

FSI Supporter

Joined: Sat Mar 05, 2005 7:28 pm
Posts: 4828
Location: Doncaster!
Drives:

where there's a will there's a way

_________________
My ebay stuff

Is that the best you can do?
-
2000 V70 T5 SE - 2.3, 5 cylinder, 20V, VVT, Turbo, 250bhp, cream leather, climate control, the works!

Top

xmadxmoex

Post subject:

Posted: Sat Mar 03, 2007 11:24 am

Banned Member

Joined: Sat Jun 03, 2006 11:48 am
Posts: 7294

Top

mrmowthie

Post subject:

Posted: Sat Mar 03, 2007 5:25 pm

Poster

Joined: Mon Feb 19, 2007 10:40 pm
Posts: 63
Location: Thornton Heath,Croydon

Top

Paul

Post subject:

Posted: Sun Mar 04, 2007 7:28 pm

FSI Supporter

Joined: Sun Mar 06, 2005 10:27 pm
Posts: 1570
Location: Oxfordshire, Banbury

_________________

Top

john_d

Post subject:

Posted: Sun Mar 04, 2007 7:47 pm

FSI Poster

Joined: Fri Feb 09, 2007 8:33 pm
Posts: 983
Location: antartica
Drives:

Top

Page 1 of 1

[ 16 posts ]

Board index » Technical Issues, Modifications, Insurance & Guides » Technical problems

All times are UTC [ DST ]

Who is online

Users browsing this forum: No registered users and 67 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: