Fiesta-Si.com • View topic - 29/07/2013 the end of the line....

View unanswered posts | View active topics

Board index » Members Gallery, Photography, Photoshop & Detailing Information » Members Gallery

All times are UTC [ DST ]

29/07/2013 the end of the line....

Moderator: FSi Moderators

Page 36 of 38

[ 741 posts ]

Go to page Previous 1 ... 33, 34, 35, 36, 37, 38 Next

Print view

Author

Message

samwatson

Post subject: Re: 3/3/2013 sam watson's si big pdate picture heavy! !!!!

Posted: Fri Apr 05, 2013 7:56 pm

FSI Poster

Joined: Tue Jun 21, 2011 9:54 pm
Posts: 939

right so i lost the internet for a month.... during that month i have made some rear quater pannels, got and fitted some turret carpet, fitted some richbrook comp valves for the tires as mine were dead and seized.

also fabricated a new lower chassis brace member for where the s brace was as could hear a slight tapping as the exhaust touches the origional s brace on putting away.... i will get a picture of the new chassis reininforce member when i can! as forgot to take pictures when i was making it.....

_________________
PSYCHO SAM WATSON #0781 366 9260
TEAM AUBERGINE

Top

DALSY

Post subject: Re: 3/3/2013 sam watson's si big pdate picture heavy! !!!!

Posted: Fri Apr 05, 2013 11:16 pm

FSI Poster

Joined: Wed Feb 20, 2008 2:04 pm
Posts: 748

looking good youve made a nice job of them

how did you do the templates for the door cards?, they look factory :thumbsup:

_________________

ST170 with High Compression Pistons, steel rods, Stage 3 head,Newman PH4 cams ,Twin 45 Delortos, Weber Alpha Management, Quaiffe IB5 gearbox,LEDA Coilovers etc .........

Top

The Loumiester

Post subject: Re: 3/3/2013 sam watson's si big pdate picture heavy! !!!!

Posted: Fri Apr 05, 2013 11:51 pm

FSI Supporter

Joined: Sun Aug 03, 2008 11:20 am
Posts: 8463
Location: Rochdale
Drives:

Good work Sam your pretty handy at fabricating panels.

Top

samwatson

Post subject: Re: 3/3/2013 sam watson's si big pdate picture heavy! !!!!

Posted: Sat Apr 06, 2013 6:34 pm

FSI Poster

Joined: Tue Jun 21, 2011 9:54 pm
Posts: 939

_________________
PSYCHO SAM WATSON #0781 366 9260
TEAM AUBERGINE

Top

samwatson

Post subject: Re: 3/3/2013 sam watson's si big pdate picture heavy! !!!!

Posted: Sat Apr 06, 2013 6:38 pm

FSI Poster

Joined: Tue Jun 21, 2011 9:54 pm
Posts: 939

_________________
PSYCHO SAM WATSON #0781 366 9260
TEAM AUBERGINE

Top

samwatson

Post subject: Re: 3/3/2013 sam watson's si big pdate picture heavy! !!!!

Posted: Mon Apr 08, 2013 8:02 pm

FSI Poster

Joined: Tue Jun 21, 2011 9:54 pm
Posts: 939

pictures of the cross bar i fabricated, much better now!............

_________________
PSYCHO SAM WATSON #0781 366 9260
TEAM AUBERGINE

Top

happypaul

Post subject: Re: 8/4/13 pannels and cross member fabrication Sam Watson's

Posted: Fri Apr 19, 2013 8:06 am

Donator? Ejaculator!

Joined: Thu Mar 30, 2006 1:23 pm
Posts: 11348
Location: Lincoln
Drives:

Liking the work.. althought that lower cross bar... just looks like its waiting to twat everything lol

_________________
Daily isn't so Special. And it makes me sad.
Need space and time and I'll crack on with Jams si!

Catch me on Facebook as I'm rarely on here.

Top

samwatson

Post subject: Re: 8/4/13 pannels and cross member fabrication Sam Watson's

Posted: Fri Apr 19, 2013 10:29 pm

FSI Poster

Joined: Tue Jun 21, 2011 9:54 pm
Posts: 939

_________________
PSYCHO SAM WATSON #0781 366 9260
TEAM AUBERGINE

Top

Spunkymonkey

Post subject: Re: 8/4/13 pannels and cross member fabrication Sam Watson's

Posted: Mon May 06, 2013 5:32 pm

Regular Poster

Joined: Wed Oct 13, 2010 1:43 am
Posts: 428
Location: Laois, Ireland
Drives:

Have you an s brace for the car mate? or is that an extra?

Looking good!

Top

samwatson

Post subject: Re: 8/4/13 pannels and cross member fabrication Sam Watson's

Posted: Wed May 08, 2013 11:04 pm

FSI Poster

Joined: Tue Jun 21, 2011 9:54 pm
Posts: 939

_________________
PSYCHO SAM WATSON #0781 366 9260
TEAM AUBERGINE

Top

samwatson

Post subject: Re: 8/4/13 pannels and cross member fabrication Sam Watson's

Posted: Thu May 09, 2013 8:51 am

FSI Poster

Joined: Tue Jun 21, 2011 9:54 pm
Posts: 939

Much more fun than polishing a car..... My nissan amirra from the weekend:

http://www.youtube.com/watch?v=0ofFSrpgYj0

_________________
PSYCHO SAM WATSON #0781 366 9260
TEAM AUBERGINE

Top

samwatson

Post subject: Re: 8/4/13 pannels and cross member fabrication Sam Watson's

Posted: Sun Jul 28, 2013 9:37 pm

FSI Poster

Joined: Tue Jun 21, 2011 9:54 pm
Posts: 939

the fiesta just got written off today big hit only about 40mph guy drove straigh in the back moved the boot loor about half a foot in and up and put me in the back of another car..... on a private road so not sure i'll get a penny.....bit pissed off to be fair

_________________
PSYCHO SAM WATSON #0781 366 9260
TEAM AUBERGINE

Top

meilack

Post subject: Re: 8/4/13 pannels and cross member fabrication Sam Watson's

Posted: Sun Jul 28, 2013 10:15 pm

Southern Events Co-Ordinator

Joined: Sat Apr 08, 2006 7:54 pm
Posts: 19134
Location: Didcot, Oxfordshire
Drives:

No bloody Way

Top

Chris

Post subject: Re: 8/4/13 pannels and cross member fabrication Sam Watson's

Posted: Sun Jul 28, 2013 10:32 pm

David Dickinson's Naughty Bit

Joined: Mon May 25, 2009 9:08 pm
Posts: 8826
Location: Bournemouth
Drives:

Not good

_________________

Top

samwatson

Post subject: Re: 8/4/13 pannels and cross member fabrication Sam Watson's

Posted: Mon Jul 29, 2013 8:23 am

FSI Poster

Joined: Tue Jun 21, 2011 9:54 pm
Posts: 939

yer mate is dead will take a few pictures but i'm not repairing it as i'd have to cut the back half of chassis out and front end off i.e new wings, slam, valance etc.

_________________
PSYCHO SAM WATSON #0781 366 9260
TEAM AUBERGINE

Top

meilack

Post subject: Re: 8/4/13 pannels and cross member fabrication Sam Watson's

Posted: Mon Jul 29, 2013 8:27 am

Southern Events Co-Ordinator

Joined: Sat Apr 08, 2006 7:54 pm
Posts: 19134
Location: Didcot, Oxfordshire
Drives:

what's the plan now?

Top

samwatson

Post subject: Re: 29/07/2013 the end of the line....

Posted: Mon Jul 29, 2013 10:15 am

FSI Poster

Joined: Tue Jun 21, 2011 9:54 pm
Posts: 939

now breaking for parts

_________________
PSYCHO SAM WATSON #0781 366 9260
TEAM AUBERGINE

Top

samwatson

Post subject: Re: 29/07/2013 the end of the line....

Posted: Mon Jul 29, 2013 10:16 am

FSI Poster

Joined: Tue Jun 21, 2011 9:54 pm
Posts: 939

only the panals and chassis are dead. all parts avalible 07813669260 sam

_________________
PSYCHO SAM WATSON #0781 366 9260
TEAM AUBERGINE

Top

fiestasiphil

Post subject: Re: 29/07/2013 the end of the line....

Posted: Mon Jul 29, 2013 11:10 am

FSI Supporter

Joined: Tue Jul 05, 2005 1:56 pm
Posts: 5533
Location: chelmsford Essex
Drives:

gutted for you mate loved that car

_________________

Rip Ben Elvin (jam)

Top

elPaulio

Post subject: Re: 29/07/2013 the end of the line....

Posted: Mon Jul 29, 2013 11:56 am

Elite FSI Poster

Joined: Wed Sep 10, 2008 1:21 pm
Posts: 1296
Location: Aberdeen, Scotland

Shit dude!! That's bad news

Top

Page 36 of 38

[ 741 posts ]

Go to page Previous 1 ... 33, 34, 35, 36, 37, 38 Next

Board index » Members Gallery, Photography, Photoshop & Detailing Information » Members Gallery

All times are UTC [ DST ]

Who is online

Users browsing this forum: Google [Bot] and 106 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: