New Here, Here are a few pics of my new project started life as a 1.25 freestyle was soon converted into a zetec S Replica fully re-sprayed and bump-strips smoothed in original moondust silver!!! no arch rot either BONUS!!! only 72,000 on shell





The Spec
1.25 zetec
Gaz Coilovers
Excite 14" alloys (came with car)
De Tango-ed headlights
Lexus Rear lights (again came with car)
Welded tip on Exhaust(AGAIN came with car)

As Soon as i got the car I got given a company car, was going to sell it as it was but thought ive put work and money into it and am now going to keep it as ive always wanted a ZS the car is on coilovers so already a good start except the fool hasnt got the setup right so first thing was to stiffen it up and get it all level....DONE!!!

One of the first thing was to get rid of the lexus rear lights, put them back to standard as best look imo for the fiesta's just need to re-wire it all up as prev owner is chopped shite out of it!!! -Knob.

As it is going to be more track i stripped rear and hammerited the whole boot floor and got it sprayed in silver again (just a precortion).

Cleaned the arches out and found a couple of bubbles starting so sorted them out and hammerited under-neath the arch should prevent it abit.

Started thinking about dropping the puma in so that will be ordered soon and hopefully re-built not in any rush with it at all the 1.25 donkey lump will be out soon (pics to follow) and clean the engine bay and get it all re-sprayed, Thinking about a black roof aswell.

More info and pics to come soon.........

To Do:
Get RS2000 alloys
Rip Donkey Out ASAP!!!!
Get Struts fitted!!!
Get roof re-sprayed or wrapped?? Suggestions???
Get 280mm brakes fitted buying them of a friend cheap as chips!
Poly bush Front n Rear
Might give coilies a Re-furb as not happy with them being dirty LOL!!!


MORE TO FOLLOW!!!

upload the pics to photobucket

then they will work

Cheers lol

Right sorted pictures out now sorry about that lol !!!

Looks smart

_________________

Cheers mate is an on going project really just thought i'd start a thread!

What you got done to yours mate it looks nice in the signiture pic!??

killed 3 engines

look at his thread

Nice little car. Plans sound good for it too

If you are going to do the roof black, get it wrapped so you can take it off if you dont like it at a later date

_________________

Looking good!!

2 engines

Quite a bit, you can look through my thread if you like. I have some Gazs coilies, puma engine and a few other bits. mainly looks stuff as pefermance hasn't gone so well

_________________

2 Engines !!! How do you find the GAZ coilies?? my mates got some AVO coilovers n there pretty rigid but seem to rigid really steps out now and again!!

I think wrapping will be the way i'll go i was gunna go chequered but can see chris has so i dont wanna copy haha......I am after some RS2000 alloys or maybe mondeo's n tyres not gotta be great as can get refurb cheap through company if you know anyone aswell??? cant wait to get some decent wheels on it!!!!!

It will hopefully be done for summer and i can get it down to some show's n meets, be more of a track slag tbf!!!

Don't put mondeos on it they don't look good on Mk5's but RS2000's do.

Gazs are great I have them on the softest setting otherwise it does kind skip about a bit.

2 engines and 2 additional heads

Wrapping is a good way of doing it, go checkered if you like I don't mind I am going grey with my checks I think.

_________________

Don't put mondeos on it they don't look good on Mk5's but RS2000's do.

Gazs are great I have them on the softest setting otherwise it does kind skip about a bit.

2 engines and 2 additional heads

Wrapping is a good way of doing it, go checkered if you like I don't mind I am going grey with my checks I think.

_________________

well RS2000 are the ones i want with maybe abit of camber just like that sort of look so if anybody has any ??

Also looking for black grill mine is Zetec S de-badged chrome one dont like it at all lol.

Well yeah i'll have a think on the cheqes lol did you do it yourself??

Mine were on the soft setting but stiffened them up abit now so nice n firm not as hard as my mates AVO ones there stupid hahaha.

Get struts all round on 25th pay day so a few goodies to come for it !!!! haha.

How do you find Puma lump against c2 VTS n saxo's Etc?? i know yours is moded but ??

don't open that can of worms........

I haven't raced anyone in it but its a good engine and has plenty of power to boot. Its a popular choice

Or you could buy my Exhaust SS4 cam off me and then buy the inlet cam from Shawspeed and fit them and remap it With an exhaust system I had 150bhp That beat VTS's

_________________

Percy is planning what to say, I can feel it . . . . .

- although you will never outhandle a C2

Need to get the lump first haha!! if you have it all in a few months I want it all re-built nice n new so touch wood nothing goes wrong!!

I'll take some more snap's on thursday when i have abit more done to it taking it to my uncles where i can rip it apart even more, More space up there so can start tearing it apart nice drive up the country lanes just needto piece together the bits that are off !!!

well then just buy the cam off me now for £100 then you can buy the rest during the rebuild

_________________