i have seen the zetec s skirts on a mk3 before and in my opinion they suit the car. does anyone know where to get them? i know ebay but do scrap yards have a lot of zetec s'?

also will i have to cut or shave any of the skirt to fit it on.

any feedback would be good. cheers

they are a nightmare to get hold of, scrappys are your best bet, or buying from ford new.

also try zsoc.com,

as for fitting, get onto fiestaturbo.com and speak to "Superal" he used to have em on his old car so he'll be able to point you in the right direction.

_________________

Ive got a set ready to go on mine once it gets a bit warmer to spray them. They are pretty simple for a mk3. They are already to correct length so all that needs to be done is the clips taken off the back, and then the two rows of plastic that the clips were attached to need to be grinded down, otherwise the stop the skirts pressing against the car fully. Also the front end needs some slight alteration with a heat gun or similar as the back overhangs quite a bit, and also the skirts bends outeards slightly.

cool no worries at uni too so was gonna do it when the summer kicks in. cheers

_________________


fibre is my friend, more to come ;-) SI/T squirrel muncher