Since i broke my old si in march due to rust ive been looking for something to take its place, this came up for sale so went to have a look at it and a deal was done

Shell is very clean and has had the rear quater changed to a 3.5 version to stop it rotting, spec is as follows

2.1 zvh built by burton power with forged pistons
stage3 big valve head with kent cvh34 and verneir pulley
Cossie t3 with -31 actuator
195 chip with beige injectors and cossie pump running ofab
pro alloy front mount and airtech alloy rad

Made 190hp at 0.5 bar and this is roughly where the boost is still set

Here are a few pics of what it was like when i collected it









Then i changed the wheels, fitted some wind deflecters and a set of genuine ford euro rear lights











Next up is a t34 with .63 housing, dark green injectors and bigger fuel pump, omex 600 management and loads more boost. Aiming for over 250hp and then have an all steel 2.1zvh to fit if i feel the need for more power.

The cage will be getting removed along with some under bonnet chrome as thats not my kind of thing

_________________


Need any fiesta parts give me a try. Have spares for zetec and fiesta turbos

Thats looks and sounds like quite a beast!! Even more beasty when you have completed your plans.

As I said the other month its insane

Also as I said today the alloys are sexy as

oo i like that, low boost but a good reliable power

a standard 1.6 on a T2 would be pushing really hard to make that power im sure


how do you get a steel zvh then?

the comp TH's suit it down to the ground!

good find

looks like a nice little car, im liking the detail on the intercooler

_________________


fibre is my friend, more to come ;-) SI/T squirrel muncher

love it

looking good

looking good buddy

it looks alot better on those TH's

what box has it got?

_________________


Need any fiesta parts give me a try. Have spares for zetec and fiesta turbos

Looks nice, much better on the new wheels too

_________________

_________________


Need any fiesta parts give me a try. Have spares for zetec and fiesta turbos

so is the white one in the sig still on the go?

Thats a very nice car mate

This a very nice car

Still have White one I'm my sig but that's on the back burner for the time being, might make some progress on it over winter

_________________


Need any fiesta parts give me a try. Have spares for zetec and fiesta turbos

spotted!?!!!

at twickenham mcdonalds or near enough - just off the A316!

Seen this cars at shows in previous years mate, always thought it looked smart. Love the new wheels you have fitted and rear lights look good too

_________________

_________________


Need any fiesta parts give me a try. Have spares for zetec and fiesta turbos

_________________


Need any fiesta parts give me a try. Have spares for zetec and fiesta turbos

i went through the drive through saw you come round sunbury cross as i was going off to lower sunbury

Had a few days off work last week so spent pretty much a hole day cleaning the car

Id seen a car a friend has that he had cleaned with the clay bar kit so decided to treat myself to one, very impressed with the results.

This is after i done it with the clay bar and a quick coat of polish, i treid polish on its own first but the paint was very oxidated but the clay bar transformed it, i really am suprised buy the results














to keep an eye on things



Turbo timer, volt and afr gauge

_________________


Need any fiesta parts give me a try. Have spares for zetec and fiesta turbos