oh yes
it should

wahey!

after a year and a half ive finally got my mk6 rs2000 wheels back off my mate.

hes shotblasted, ground all the kurbing off, powder primered then powder coated them white.

to be totally honest, it was well worth the wait, i think they look the nuts! just gota wait for him to paint the centre caps now.

what do you guys think?











they just about fit over the st24 calipers, but they a bloody close to the coilovers.

will be getting a special deal on some toyos in the next few weeks for em. then i can get them on there properly!

_________________

Suzuki Ignis Sport - ITG Maxogen - Japspeed 4-1 - Decat - 2" custom single box Scorpion exhaust 3" tip - Magnecor leads - Air con Removed - Apex 35mm springs - OMP Strut brace - Whiteline rear arb - EBC Greenstuff front pads - MTEC grooved/drilled discs - Team Dynamics Pro rally 15X6J ET28 - Toyo tyres - Rallyflapz - Black lamps - Smoked repeaters - Sparco pedals - Stripped 40kgs rear interior
125.4BHP 126.6LBFT

Wish mine came out like that

_________________

Stunning mate

_________________

Looks like they were worth waiting for

stunning mate, closest thing to a Comp MO5 imo

id liek some of these for the escort in white too

bugger to keep clean though


they will rub once the tyres are fitted they will rub, get some 3-5mm spacers on mate

Awesome!!! does your mate fancy doing mine?

_________________

The Fat Fake Xr2i

Look superb!

love them

_________________

Suzuki Ignis Sport - ITG Maxogen - Japspeed 4-1 - Decat - 2" custom single box Scorpion exhaust 3" tip - Magnecor leads - Air con Removed - Apex 35mm springs - OMP Strut brace - Whiteline rear arb - EBC Greenstuff front pads - MTEC grooved/drilled discs - Team Dynamics Pro rally 15X6J ET28 - Toyo tyres - Rallyflapz - Black lamps - Smoked repeaters - Sparco pedals - Stripped 40kgs rear interior
125.4BHP 126.6LBFT

looks the tits danny mate.
i wont need spacers will i! ?

_________________

fifi

I'd space them out, all my wheels seem close to coilys.

Wheels look sweet

Have fun keeping them clean

_________________
Daily isn't so Special. And it makes me sad.
Need space and time and I'll crack on with Jams si!

Catch me on Facebook as I'm rarely on here.

ill see when i fit em.

how much do you think they will need spacing out paul? 5mm each side?

i think the rears will be alright.

cheers for the comments guys.

started stripping my colleagues sierra sapphire last night. hes building it as a track toy. should be around 170bhp when its done, and a good match for my fiesta. we are all in competetition in work lol

theres 3 of us building track weapons.

one of the boys got the sierra, hes putting my bosses old 2.2 pinto in it which was rr`d about 170bhp

i got my fiesta, which when its done should be about 140-150 bhp

and my boss got a mk1 mexico, hes just bought a new engine from burton power 2.2 pinto with 222bhp!!

_________________

Suzuki Ignis Sport - ITG Maxogen - Japspeed 4-1 - Decat - 2" custom single box Scorpion exhaust 3" tip - Magnecor leads - Air con Removed - Apex 35mm springs - OMP Strut brace - Whiteline rear arb - EBC Greenstuff front pads - MTEC grooved/drilled discs - Team Dynamics Pro rally 15X6J ET28 - Toyo tyres - Rallyflapz - Black lamps - Smoked repeaters - Sparco pedals - Stripped 40kgs rear interior
125.4BHP 126.6LBFT

nice, ive spaced each of my ET40 escort wheels out by 5mm

where do you get these spacers chaps? and what sort of money are we talking?

_________________

fifi

depends if you want proper hub centric ones or just the shitty ones lol

_________________

Suzuki Ignis Sport - ITG Maxogen - Japspeed 4-1 - Decat - 2" custom single box Scorpion exhaust 3" tip - Magnecor leads - Air con Removed - Apex 35mm springs - OMP Strut brace - Whiteline rear arb - EBC Greenstuff front pads - MTEC grooved/drilled discs - Team Dynamics Pro rally 15X6J ET28 - Toyo tyres - Rallyflapz - Black lamps - Smoked repeaters - Sparco pedals - Stripped 40kgs rear interior
125.4BHP 126.6LBFT

shitty ones are anything from £5 on really

i got 4 for mine for less than £15 posted, come the next day too

do they do the trick like?

guessing hubcentric are where they sit direct to the hub, whereas the cheapo ones you have to hold in place so when the wheel is tight it holds them in place? correct?

trial fitted mine today danny, rubbing with the wheels mate so defo need to spacer them.
wheel nuts are fucked, where are yours from mate because my aftermarket ones dont fit?

_________________

fifi

yeah you got it mate..

what size tyres you running?

where do they rub?

do they rub on the back?

i got standard ford nuts for mine..

_________________

Suzuki Ignis Sport - ITG Maxogen - Japspeed 4-1 - Decat - 2" custom single box Scorpion exhaust 3" tip - Magnecor leads - Air con Removed - Apex 35mm springs - OMP Strut brace - Whiteline rear arb - EBC Greenstuff front pads - MTEC grooved/drilled discs - Team Dynamics Pro rally 15X6J ET28 - Toyo tyres - Rallyflapz - Black lamps - Smoked repeaters - Sparco pedals - Stripped 40kgs rear interior
125.4BHP 126.6LBFT

5mm cheapo ones will do, if its rubbing on the face of the strut, or like mine were on the spring cup, it should help the wheel rubbing on the arch lining too