Fiesta-Si.com • View topic - Fitting a 1600 zetec from an esc cab into a 1.1 fiesta?

View unanswered posts | View active topics

Board index » Technical Issues, Modifications, Insurance & Guides » Modifications

All times are UTC [ DST ]

Fitting a 1600 zetec from an esc cab into a 1.1 fiesta?

Moderator: FSi Moderators

Page 1 of 1

[ 13 posts ]

Print view

Author

Message

Stealthdog

Post subject: Fitting a 1600 zetec from an esc cab into a 1.1 fiesta?

Posted: Tue Mar 08, 2011 12:39 pm

New Member

Joined: Tue Mar 08, 2011 12:22 pm
Posts: 7

Hi guys I need your help, I have a fiesta 1.1lx Si replica and an escort mistral cab, I need to know how to sort the wiring loom as I've not got a clue about electrics? I also here everything will drop out of my escort straight into the fiesta, I know it's identical to the Si engine and apparently the engine/gearbox driveshafts, engine mounts ect will drop right in, the thing I'm stuck on is the loom, how do you go about converting it ect? Any help is good help and any advice on this conversion and any probs I might face in doing it will be much appreciated, many thanks Carl

Top

- Danny Boy -

Post subject: Re: Fitting a 1600 zetec from an esc cab into a 1.1 fiesta?

Posted: Tue Mar 08, 2011 8:11 pm

FSI Supporter

Joined: Fri May 23, 2008 12:40 am
Posts: 7094
Location: Portsmouth
Drives:

check fiestaguides.co.uk. think there is a 1.1 to 2.0 guide on there. same pricipals apply though

_________________

Top

Stealthdog

Post subject: Re: Fitting a 1600 zetec from an esc cab into a 1.1 fiesta?

Posted: Tue Mar 08, 2011 10:16 pm

New Member

Joined: Tue Mar 08, 2011 12:22 pm
Posts: 7

Cheers mate it check it out, was gonna use the escort loom but not sure how to go about it, or might just get a Si loom and save cuttin anything, I want to keep it cheep and use most of the resources I have :-)

Top

big g1985

Post subject: Re: Fitting a 1600 zetec from an esc cab into a 1.1 fiesta?

Posted: Tue Mar 08, 2011 10:41 pm

FSI Poster

Joined: Mon Nov 17, 2008 1:56 pm
Posts: 872
Location: amesbury and south wales
Drives:

wouldnt bother with a 1.6 personally go for a 1.8 or 2ltr

Top

Stealthdog

Post subject: Re: Fitting a 1600 zetec from an esc cab into a 1.1 fiesta?

Posted: Tue Mar 08, 2011 11:18 pm

New Member

Joined: Tue Mar 08, 2011 12:22 pm
Posts: 7

2.0lt zetec turbo will go in after the 1600 zetec, but wanna bring my insurence down a bit first, my 1600 engines has been cam'd, ported/polished, chipped and bigger injectors ect by the previous owner

Top

- Danny Boy -

Post subject: Re: Fitting a 1600 zetec from an esc cab into a 1.1 fiesta?

Posted: Wed Mar 09, 2011 12:44 am

FSI Supporter

Joined: Fri May 23, 2008 12:40 am
Posts: 7094
Location: Portsmouth
Drives:

What kinda power is it producing with them mods?

Are you going to declare them on the insurance? lol

_________________

Top

Stealthdog

Post subject: Re: Fitting a 1600 zetec from an esc cab into a 1.1 fiesta?

Posted: Wed Mar 09, 2011 11:45 am

New Member

Joined: Tue Mar 08, 2011 12:22 pm
Posts: 7

Im not too sure to be honest? it pulls like a train in a heavy cab so should make the fiesta a real pocket rocket, as for the insurence, I won't declare the mods but I will inform them of the engine change as well as the Dvla, if I had my way I would of kept the 1.1 gear box, but it wouldn't last too long, would of been fun while it lasted lol

Top

The Loumiester

Post subject: Re: Fitting a 1600 zetec from an esc cab into a 1.1 fiesta?

Posted: Wed Mar 09, 2011 12:28 pm

FSI Supporter

Joined: Sun Aug 03, 2008 11:20 am
Posts: 8463
Location: Rochdale
Drives:

My engine has supposedly been ported and polished could not tell if it has or not though.

Top

Stealthdog

Post subject: Re: Fitting a 1600 zetec from an esc cab into a 1.1 fiesta?

Posted: Wed Mar 09, 2011 3:36 pm

New Member

Joined: Tue Mar 08, 2011 12:22 pm
Posts: 7

Youll only know for sure if u take the head off and check factory dimensions against your dimentions I guess?

Top

booker

Post subject: Re: Fitting a 1600 zetec from an esc cab into a 1.1 fiesta?

Posted: Wed Mar 09, 2011 3:40 pm

FSI Poster

Joined: Fri Nov 20, 2009 10:46 pm
Posts: 817
Location: bluewater
Drives:

bit off subject but how do you port and polish a head has anybody got any comparison pics as this intrests me as i want to do it :halo:

Top

Stealthdog

Post subject: Re: Fitting a 1600 zetec from an esc cab into a 1.1 fiesta?

Posted: Wed Mar 09, 2011 6:22 pm

New Member

Joined: Tue Mar 08, 2011 12:22 pm
Posts: 7

You take it to a cylinder head specialist and they do it all for u, there's one in Telford, Shropshire called head techniques

Top

- Danny Boy -

Post subject: Re: Fitting a 1600 zetec from an esc cab into a 1.1 fiesta?

Posted: Wed Mar 09, 2011 9:32 pm

FSI Supporter

Joined: Fri May 23, 2008 12:40 am
Posts: 7094
Location: Portsmouth
Drives:

All you do is make the ports bigger, which is porting. and polishing is the process of making them very smooth - like a polished surface. that increased maximum air flow and the velocity of which it travels

_________________

Top

Stealthdog

Post subject: Re: Fitting a 1600 zetec from an esc cab into a 1.1 fiesta?

Posted: Wed Mar 09, 2011 10:12 pm

New Member

Joined: Tue Mar 08, 2011 12:22 pm
Posts: 7

Anywho, does anyone know how to dr my escort wiring loom to fit me fiesta?

Top

Page 1 of 1

[ 13 posts ]

Board index » Technical Issues, Modifications, Insurance & Guides » Modifications

All times are UTC [ DST ]

Who is online

Users browsing this forum: No registered users and 38 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: