that is also a good point, just 2.0 it

do it

strip it out, 2.0, but not before sixfields

i can give you that lift if you want mate

it does have new parts mate

and headgasket could let go anytime so i wouldn't risk it

and i won't charge you a fortune for a lift

Not that your persuading him in any way

You should deffo do it tho mole, you know you want to!!

_________________

me? persuade? never

Will have to jump in with you now not happy, anyone comes across a mondeo 2.0 ecu let me know will keep my eyes open for an engine

If i dont find stuff in time i will probably just chuck Jakes 1600 in it and have done

Was looking forward to blasting to sixfields in it

i'm sure i will provide fun in the ST

Said it might be the head gasket with the amount of air coming back into the header tank when we did rad. I wouldnt use it to much as the chances are the water is either leaking into the bores or the heating system will be getting compressed by the force of the engine.

Get youself down to deane woods in aldershot. Plenty of cheap bits in there and always has mondeos in

_________________


Need any fiesta parts give me a try. Have spares for zetec and fiesta turbos

Son of a bitch, i STILL dont have the Locking wheel nut key, so i STILL cant sort the front wheel out

Ive text the previous owner countlessly to find out where they are as he was sending them first class signed for and its been over a week

Not happy, doubt im going to get a response, and will be interesting to see if he turns upto sixfields now?

Anyone know if you can get the locking wheel nuts off without the key? Going to leave it off the road still anyway for now until i find an engine

Drill it? and then you'll have to replace the stud as well. Just an idea no idea if it will work

Edit - done some reading and you could get a socket and hammer it over and force it on then take it off. or

Quote..

Use one of those reverse thread sockets, i had the same problem a few months ago, smacked the fuck out of the lockers first to shock it then hammerd the socket over it, and when you turn the socked off it bites into the metal and lockes itself on

_________________

Yeah you can usually knock a socket over the top and wind them off. Depends what design they are. Get a pic up so we can have a look

_________________


Need any fiesta parts give me a try. Have spares for zetec and fiesta turbos

I ended up using an old socket on mine mate, hammered fuck out of it till it was on snug then ratchet it off

_________________


FEED ME MORE!!!!

Are they standard ford one Ade?

looks like a nice car good luck with it

can always get a air chisel to the back of the stud, if you cant get a socket to get it off, btw car looks nice mate glad you got another si, deep down your a si man !

_________________





Rip Ben Elvin (jam)

Just picked up a DEEP Ecu for her Just to find an engine now

Nice one mate

_________________

£20 delivered

Might see if anyone living up north like yourself could pick me up something manchester way

Theres an RS turbo bonnet in dark green, it might be tourmallard, which i quite fancy, would be great if someone could bring it to a meet that way as would be worth going for it that way