Hi i am going to put a water temp Gauge but i need to order the Water Temperatur​e Sensor adaptor so would like some to tell me if they can inner dimensions of the top hose by radiatoras i am not shure of size to order
Adapters size:
32mm i hope
I also order a volt gauge but i am also thinking of oil temp Gauge but not shure what i need as i guess its will be connected to the engine some how

As said in the PM mate you can fit the new sensor in place of the old one so no need to cut the top hose etc.

I can supply you one of these if you want to put the gauges in to keep the dash looking standard. Have black and grey ones but cant use them with my cage



it takes 2 52mm gauges

_________________


Need any fiesta parts give me a try. Have spares for zetec and fiesta turbos

OOh you need to tell me what is needed to fit rst counters, obvi i would need the clocks.. but what else?
New speedo cable, the thing that the speedo goes into on the gearbox?

_________________

She's still alive! -23/02/2017

_________________


Need any fiesta parts give me a try. Have spares for zetec and fiesta turbos

let me know when you are a round mate i can pick it up this week

_________________


Need any fiesta parts give me a try. Have spares for zetec and fiesta turbos

thxs for that letme know the cost of the hose and the dials holders mate and how many you have i guess i will paint them so if you have to blacka and a gray just lem me no what you have

oh ok lol... i guess the timing is in the clock then.
The reason why i asked is because RST dials go up to 150mph, and standard 140mph.
:s

_________________

She's still alive! -23/02/2017

Yeah the timing/mechanics in the clock will be different. Gear box/speed sensor are the same on models.

Need a pair of clocks???

_________________


Need any fiesta parts give me a try. Have spares for zetec and fiesta turbos

ok what night are you free and how much

Yeah, all i want is the speedometer - 150mph.
Because rst rev counter will be incorrect due to it being electrical and going on a zetec engine rather than cvh, and it would be much cheaper to send it too.
What's the mileage?
Or do you know how to change it without actually moving the numbers lol

_________________

She's still alive! -23/02/2017

Rev gauge will be the same mate so it would be easier to do a complete swap of the units. can send just the clock if you want just that bit but would want the same as the complete set.

_________________


Need any fiesta parts give me a try. Have spares for zetec and fiesta turbos

Ill have the whole thing then haha

_________________

She's still alive! -23/02/2017

Send me a PM we can discuss instead of taking this thread off topic

_________________


Need any fiesta parts give me a try. Have spares for zetec and fiesta turbos

oh yeah my bad lol

_________________

She's still alive! -23/02/2017

Ok i decided to put the Gauges in the centre console so i made the fixing plate and put the Gauges in and also wire them up when i have a good day with the weather..should only need a bit of a trim to get it to fit

looks really good mate

_________________

i am just waiting for a good day to fit them now