Does a 1.6 zetec flywheel go onto a cvh engine?

Trying to find this information is hard, im after a cvh one but is proving hard to get!

ive just compared the two flywheels, ones i have are same diameter and rear spacing and would expect same bolt pattern is both got 220mm clutch, only thing was Si one was about 1mm thicker towards the front and has the extra thickness at rear for the crank position sensor pickup

_________________
Will

You dont fancy selling one do ya?

the CVH one i have is from a escort XR3i think postage be a killer unless you local to Norfolk?

_________________
Will

How heavy is it? ill get a postage quote

Shouldnt be too much

Just weighed the one that came of my 1.1 engine and that is 7.2kg parcelforce want £15 postage roughly

just been to take it off so can weigh it and there is a fair bit of wear on the face of it so its not the best

_________________
Will

Ah i see, its impossible to find one anywhere lol

No problem mate, thanks for your help

parcel2go.com posted mine for about a tenner

i think a cvh one will go on a zetec but im sure the bolt holes need enlarging by about a 1mm or something. the cvh ones are lighter i think too

_________________
- A forum dedicated to the Fiesta Mk7 - 1 year old and going strong!
Info and guides on the Mk3 Fiesta

I like boost! Formerly cookie456_the2nd

What an amazing site, soo cheap!

Yep, very good service from them too!

_________________
- A forum dedicated to the Fiesta Mk7 - 1 year old and going strong!
Info and guides on the Mk3 Fiesta

I like boost! Formerly cookie456_the2nd

cvh will fit a zetec and as said needs the holes drilling to 11mm, is lighter than the zetec on by about 2kg iirc. Wouldnt fit a zetec one to a cvh as the holes will be to large for the bolts.

_________________


Need any fiesta parts give me a try. Have spares for zetec and fiesta turbos