Fiesta-Si.com • View topic - how high would you rev a zetec engine?

View unanswered posts | View active topics

Board index » General Automotive Discussion & Site Information » General

All times are UTC [ DST ]

how high would you rev a zetec engine?

Moderator: FSi Moderators

Page 1 of 2

[ 39 posts ]

Go to page 1, 2 Next

Print view

Author

Message

The Loumiester

Post subject: how high would you rev a zetec engine?

Posted: Thu Oct 07, 2010 6:23 pm

FSI Supporter

Joined: Sun Aug 03, 2008 11:20 am
Posts: 8463
Location: Rochdale
Drives:

i dont like goin past 5500rpm as im sure you all know its peak power but check this guy out i found on youtube:

also while i was just browsing around i saw this fiesta go off the clock, its in km/h but i presume they still finish at 140mph or 150mph:

Top

stuff n that

Post subject: Re: how high would you rev a zetec engine?

Posted: Thu Oct 07, 2010 7:09 pm

Regular Poster

Joined: Wed Jul 01, 2009 1:25 am
Posts: 304
Location: barnsley
Drives:

mines seen 6k+ loads of times and still runs mint, went up to 7k a couple of week back with no sign of a limiter so dno wen that kicks in

_________________

Top

Percy

Post subject: Re: how high would you rev a zetec engine?

Posted: Thu Oct 07, 2010 7:13 pm

Driving Gods

Joined: Sat Mar 05, 2005 1:37 pm
Posts: 7771
Location: Manchester
Drives:

Going about 6k is fine as you drop when you change but past that its pointless, unless you own a C2 :lol:

_________________

Top

The Loumiester

Post subject: Re: how high would you rev a zetec engine?

Posted: Thu Oct 07, 2010 7:30 pm

FSI Supporter

Joined: Sun Aug 03, 2008 11:20 am
Posts: 8463
Location: Rochdale
Drives:

does honda's vtec engine get a pick kick at 6000rpm?

Top

Chris

Post subject: Re: how high would you rev a zetec engine?

Posted: Thu Oct 07, 2010 7:32 pm

David Dickinson's Naughty Bit

Joined: Mon May 25, 2009 9:08 pm
Posts: 8826
Location: Bournemouth
Drives:

6850. Wom wom wom wom wom limiter. :lol:

I revved my Si once to over 7000 accidentally when overtaking once. I might have just hit the limiter as I changed gear it jumped out of gear and into the other one without much effort :lol:

Thrasing on the limiter all the time isn't so good though, but its got a limiter for a reason

Civics rev to like 8000-9000rpm?

Mazda rx-7/8's rev to 9000rpm as well.

_________________

Top

Dave G fsi

Post subject: Re: how high would you rev a zetec engine?

Posted: Thu Oct 07, 2010 7:32 pm

Northern Events Co-Ordinator

Joined: Tue Jul 17, 2007 9:53 pm
Posts: 8546
Location: Sheffield
Drives:

I get a final little power kick just before 5000 then just after 5000 there is nothing else to gain so I change. Usually keep her below 4000 day to day tho :thumbsup:

_________________

Top

The Loumiester

Post subject: Re: how high would you rev a zetec engine?

Posted: Thu Oct 07, 2010 7:34 pm

FSI Supporter

Joined: Sun Aug 03, 2008 11:20 am
Posts: 8463
Location: Rochdale
Drives:

mines just 0 rpmday to day lol, its only weekends it gets drove and then it barley moves lol

Top

big g1985

Post subject: Re: how high would you rev a zetec engine?

Posted: Thu Oct 07, 2010 7:35 pm

FSI Poster

Joined: Mon Nov 17, 2008 1:56 pm
Posts: 872
Location: amesbury and south wales
Drives:

7500rpm ish

Top

meilack

Post subject: Re: how high would you rev a zetec engine?

Posted: Fri Oct 08, 2010 6:43 am

Southern Events Co-Ordinator

Joined: Sat Apr 08, 2006 7:54 pm
Posts: 19134
Location: Didcot, Oxfordshire
Drives:

depends, a 1.6 i wouldn't bother past 5500rpm, 1.8 or 2.0 can rev to 7 with mods but it all depends on the engine really.

My ST pulls to 7200rpm

Top

EvilDes

Post subject: Re: how high would you rev a zetec engine?

Posted: Fri Oct 08, 2010 7:43 am

Evil Admin

Joined: Tue Dec 21, 2004 8:31 pm
Posts: 13430
Location: Birmingham (near Sutton Coldfield)
Drives:

My Si had a limiter on just over the 7500rpm line :lol:

It's not a nice limiter

It doesn't bounce like a proper limiter. It's just like you've hit a brick wall :look:

_________________

Quote Clarkson, Top Gear, 17th July: "I'm not having a stroke... just driving a Nissan!"
Quote Ry, Mallory Park, 3rd Dec: "Ahhhh crap... Just a bit too over eager really!"
"I used to be an adventurer like you, but then I took an arrow in the knee"

Top

onslack

Post subject: Re: how high would you rev a zetec engine?

Posted: Fri Oct 08, 2010 8:47 am

The Sherminator!

Joined: Sun Mar 06, 2005 6:10 pm
Posts: 22224
Location: Somewhere

i have no rev gauage so i have no idea what i'm rev'ing to :red:

my 2.0'd si was rev'd to 7k once and never again :cry:

i reckon that 1st vid, the Si might be cam'd etc

least with my megasquirt i'll get a proper limiter with some pop and bangs :halo:

Top

The Loumiester

Post subject: Re: how high would you rev a zetec engine?

Posted: Fri Oct 08, 2010 10:03 am

FSI Supporter

Joined: Sun Aug 03, 2008 11:20 am
Posts: 8463
Location: Rochdale
Drives:

You will have to get a video of it.

Top

fiestasiphil

Post subject: Re: how high would you rev a zetec engine?

Posted: Sat Oct 09, 2010 8:13 am

FSI Supporter

Joined: Tue Jul 05, 2005 1:56 pm
Posts: 5533
Location: chelmsford Essex
Drives:

cookie456the2nd got his old si off the clock at over 140mph with the erst box ive had 136mph and it had more to go, rev wise i cant remember its been so long

_________________

Rip Ben Elvin (jam)

Top

Percy

Post subject: Re: how high would you rev a zetec engine?

Posted: Sat Oct 09, 2010 10:24 am

Driving Gods

Joined: Sat Mar 05, 2005 1:37 pm
Posts: 7771
Location: Manchester
Drives:

_________________

Top

meilack

Post subject: Re: how high would you rev a zetec engine?

Posted: Sat Oct 09, 2010 10:26 am

Southern Events Co-Ordinator

Joined: Sat Apr 08, 2006 7:54 pm
Posts: 19134
Location: Didcot, Oxfordshire
Drives:

no not yet, and the rev limiter drops to 6800ish in 3rd and 4th but 7200rpm in 1st and 2nd :hmm:

Top

Post subject: Re: how high would you rev a zetec engine?

Posted: Sat Oct 09, 2010 12:27 pm

Jap Crew

Joined: Tue Dec 21, 2004 6:24 pm
Posts: 11189
Location: In the Shires
Drives:

it's strange how limiters differ.

If you want to drive mine properly it's the limiter or near damn it each time so that you constantly land in vtec mode. I aim to change around 9200 on the clocks, limiter kicks in at 9500 exactly, but the real limiter is at 8700 so that shows how far out they are.

depends where the power bands are on the Si engines?

_________________
Rest in peace Ben "Jam" Elvin. Gone but never forgotten.

Top

meilack

Post subject: Re: how high would you rev a zetec engine?

Posted: Sat Oct 09, 2010 5:58 pm

Southern Events Co-Ordinator

Joined: Sat Apr 08, 2006 7:54 pm
Posts: 19134
Location: Didcot, Oxfordshire
Drives:

yeah pumaspeed say max power on their kits is 6800 so i change there usually :lol:

Top

The Loumiester

Post subject: Re: how high would you rev a zetec engine?

Posted: Sat Oct 09, 2010 7:04 pm

FSI Supporter

Joined: Sun Aug 03, 2008 11:20 am
Posts: 8463
Location: Rochdale
Drives:

do fast road cams on a 2litre zetec bring the peak power up from 5500rpm?

Top

will121

Post subject: Re: how high would you rev a zetec engine?

Posted: Sat Oct 09, 2010 8:56 pm

FSI Poster

Joined: Fri Feb 08, 2008 1:43 pm
Posts: 888
Location: Norwich
Drives:

_________________
Will

Top

Dave G fsi

Post subject: Re: how high would you rev a zetec engine?

Posted: Tue Oct 12, 2010 4:18 pm

Northern Events Co-Ordinator

Joined: Tue Jul 17, 2007 9:53 pm
Posts: 8546
Location: Sheffield
Drives:

_________________

Top

Page 1 of 2

[ 39 posts ]

Go to page 1, 2 Next

Board index » General Automotive Discussion & Site Information » General

All times are UTC [ DST ]

Who is online

Users browsing this forum: No registered users and 44 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: