I thought i see a reverse camera in your rear bumper and i was right

_________________

This weekend busy time for me and my car .
jobs

1) Painting Brake Calipers and hubs
2) Replacing rear Q lights both side new glass .
3) sorting dash lights and dials out checking connections or if any wires making contact with earth as fuse did blow .
4) center console refit
5) speed o cable refit
6) Clean up all earth under the bonnet
7) Rear wing to sort rust and fill and paint .also a round car and sunroof
8) festa si.com stickers to fit
9) some painting to do under car also re check rust
10) full side stickers to put on last thing

i had this car for 6 years way i look at it some people may not like the sitickers and stuff but because i am almost at the big 50 its sort of re living my youth
i expect i will remove it all in like a month or 2

My rust Protection
Rustisol is unique:
This is the only rust protection currently available with a pH of 7 which can be directly applied to rust and which also combines with existing rust to form a permanent protective layer or coating.

Rustisol rather than being a rust converter is a completely original combination of active substances which make it fundamentally different from all acid based rust converters. Whereas the usual rust converters contain acids of strengths ranging from 0.5 to 3.2 Rustisol is completely neutral at a pH of 7 and combines with the rust to produce a ferro-organic-acid-free coating which gives complete protection against further corrosion.

Rustisol is the only protection against corrosion available with a pH of 7
Patents have already been awarded in the USA, Japan, Great Britain, France, Switzerland and Germany. Further patents are in progress. The German Patent Office recognizes that "technically, Rustisol is a major improvement on all acid-based rust converters".

Rustisol is applied directly to the rust:
http://www.metaflux.com/products_singles_70_35.htm
Alu-zinc Metaflux Liquid-Aluminium
70-41 Alu-zinc mixture anti-corrosion coating for larger areas, can be sprayed on or applied with a brush.

Then a wait then i spray Red oxide primer then after this i spray a paint spray over then to complete i under seal the area then i nomal wax oil like drainage holes or inside wings ETC

hang on did i read that right your knocking on the door of 50,
nice one for going back to your roots

_________________


fibre is my friend, more to come ;-) SI/T squirrel muncher

respect to that man

yes



But still very much in to doing stuff like this i do go to a lot of lan partys as gaming was a big part of my life for years ...

I am also thinking of getting some panel woirk painting stuff like that done

I have some rust starting a round the sunroof and need some plating a round the ns rear Q panel also rust on the osr wheel arch so i have a friend who is a very good panel beater also have some one who would spray it so i am thinking after the summer getting work done on the car ..

i got this car like end of 2004 so i had it a few years last 3 years it pass with no problems at all so time for me to look under the car again .. i

Here is my ICE


I got this gem from a place in guildford because it was 4 years old and hads never been in a car was 117.50

tweeters


full range doors


shelf

http://www.pioneer.co.uk/uk/products/ar ... index.html

Sub

Amp


the stuff a bit old now but still sounds good but it setup for hardcore drum & bass and rap

P.S car needs a clean

setup looks nice

that headunit was a steal

love the headunit. all the sysem looks cool. bet it sounds nice.

_________________

yes sounds good just by changing the head set its made a difference and the last one was a good one too

I have decided that i don't like the stickers any more so in about 6 weeks they will be coming off as i am having the last bit of welding done doing patch over the osr arch also welding in a new arch nsr + filling and also bonnet dent and sorting rust out on sunroof .. i am also thinking of getting rid of m3 mirrors and spraying the old mirrors to match the paint work ..

Plans sound good matey

sound good mate

_________________


RUST IS LIGHTER THAN CARBON FIBER

http://www.fiesta-si.com
http://www.fiestaguides.co.uk/

i like the plans for the colour coded wing mirrors

_________________
To rebuild?

will all add to it mate, will look really good when done!!

_________________


FEED ME MORE!!!!

Set of standard/tinted/clear rear lights and you'd be on your way to a tidy Si! Sounds good.

_________________

also getting a dent sorted on the bonnet too

I have in the last few days order some bits to make my own (K&N 57i Air Induction Kits) as i don't like the look i am going to use the standed box that connect to the efi inlet but i have had it painted as i am going for a red look for the kit here some pictures just some bits i order..

This been painted to day


silicone hose

this may not get used yes not shure


more pictures to come i am hoping its done for the weekend

i have a air cone 84 mm and a oil breather filter also some joiners and a 45% red silcone pipe

also got some rubber bushs for the maf also making a bracket to carry the air filter should be more pictures later ..waiting on the post

looks good mate

_________________


RUST IS LIGHTER THAN CARBON FIBER

http://www.fiesta-si.com
http://www.fiestaguides.co.uk/