put my 1.1 box on today got old one off fine was going to fit my release bearing but wouldnt go on the 1.1 box so put that back on (this is where i think ive gone wrong as im not sure it was on right and could make a differnace not sure)

fitted it all back to gether fine put everything back on starts it up and the clutch works the oppersite way round to what it should

press the clutch down for it to bite/go and with the pedal up is off if that makes sense to anyone

any help on this would be great gonna to have to take it all off again and start again but thought someone may have heard of this before and know where i have gone wrong

_________________

by the sounds of it..what ever you have done wrong will mean the box has to come off anyways...only thing i can think of is the bearing has got jammed in the pressure plate and is making it work like a pull clutch rather than a push clutch..but i wouldnt have thought that possible..have you had the clutch off...did you put the friction plate in the right way round?

Jam.

I've never heard of that happening before.

_________________

sorted the box didnt have to come off i lifted the clutch pedal like a twat with made the cog on back of it spin round so it was back to front

all fixxed and working well

_________________

Glad to hear you got it all sorted mate! Bet it would be quite interesting trying to drive a car with a reverse clutch!

_________________

glad you got it sorted sounded really confusing

_________________

Understeer: when you hit the wall with the front of the car.
Oversteer: when you hit the wall with the back of the car.
Horsepower: how fast you hit the wall.
Torque: how far you take the wall with you.

yeah bit hard to explain properly but if you got in it you would know what i ment stright away

_________________