Reshelled an si into a fiesta quartz and tonight was time to attempt to start it for the first time. Its using a 1.1 fuel pump and tank,1.6si loom and engine etc and turn the key and bugger all.Pump doesn't prime
I checked the fuel cut off switch in passenger footwell but its in the pressed in down position so thats fine,Even tapped it to release the spring and repressed it but nothing. The imobiliser light comes on and then dissapears fully as it should do so the PATS isn't screwing up as for a minute I thought I had mixed up my PATs modules.
Disconnected the fuel pump plug and pulled it back into the car.Tested my old si fuel pump against the battery and it works fine so plugged it into the loom....NOTHING
I'm annoyied. Any advice?
