its easy to do aslong as you use the right stuff and dont rush it
i did mine myself and there pretty good, would have been better if i had removed the windows but i think there pretty damn good
i used to work for a vinyl company so i know how to apply the stuff but basicly the best thing to used is water with a drop of liquid baby soap as that doesnt have all the bad bits that washing up liquid does
then put it into a spay bottle and spray the window and the film! remembering to clean the windows first so there spotless any grease will make it lift again!
once both window and film are wet lay the film over the glass and the useing a squeegy or just a credit card apply pressure from the middle outwards(but not too hard on first swipes as your crease the film, once thats done your be left with the film lifing in lines(its hard to explain) but basicly use a heat gun and heat the lifted bits from the middle outwards while pushing them out with you thumb/card untill there gone(this can take a lil while as what the heat is doing is evapourating that warter that is making it lift
it takes alot of heat to melt this stuff so dont worry too much about over heating
hope this helps
_________________
Audi A4 Cabriolet 2.5TDI 163 Sport
Full Interior Lighting Pack - Puddle Lights, Footwell Lights, Door Markers, Handle Ambient Lights, Air Vent Illumination, Armrest Illumination, Roof Ambient Lights. Auto Dim Rear View Mirror, Cruise Control, Full DIS, Genuine 6 Disc CD Changer in Glovebox, RNSE, Remote Windows, Parrot Bluetooth, Storage Pack, Full Leather, Heated Mirrors
Login
Register
Main Website
Search
