when im home im around the pontypridd area

ahh rite kwl! not far from me then!

_________________

Suzuki Ignis Sport - ITG Maxogen - Japspeed 4-1 - Decat - 2" custom single box Scorpion exhaust 3" tip - Magnecor leads - Air con Removed - Apex 35mm springs - OMP Strut brace - Whiteline rear arb - EBC Greenstuff front pads - MTEC grooved/drilled discs - Team Dynamics Pro rally 15X6J ET28 - Toyo tyres - Rallyflapz - Black lamps - Smoked repeaters - Sparco pedals - Stripped 40kgs rear interior
125.4BHP 126.6LBFT

Lookin good there mate! U did well getting that down pipe past the starter motor, looks pretty tight! That tool box looks pretty organised, I've just got random sockets lying around all over the place, never get round to sorting them out!

_________________

making some good progress buddy

What exhaust manifold is it? :-)

_________________
Daily isn't so Special. And it makes me sad.
Need space and time and I'll crack on with Jams si!

Catch me on Facebook as I'm rarely on here.

its one from the states
its a focus header in all it cost me around £90 delivered

_________________
Daily isn't so Special. And it makes me sad.
Need space and time and I'll crack on with Jams si!

Catch me on Facebook as I'm rarely on here.

not to much just a bit of hammering to get it to clear the starter
but ive got to mod it a bit to fit the magnex system ive got as the down pipe is shorter than the std one

ell the rs is now gone to the scrap yard but it did put up a fight as the guy tried to get it onto the flat bed



and there it goes to the big scrap yard in the sky


also today i started to build up the rear beam so i can just swap the si one over with the rs one
as i was taking off the anti roll bar one of the brackets broke but luckely ive got a spare arb at home



all beign well i will get it fitted tomorrow along with the front suspension

Looking good

That manifold seems quite tastey, I asumed they would be more involved in modding them to fit.. I'll bear that in mind

_________________
Daily isn't so Special. And it makes me sad.
Need space and time and I'll crack on with Jams si!

Catch me on Facebook as I'm rarely on here.

RS looks in a bit of a sorry state now! lol! I love the fact that it says "SHED" on the rear quarter pannel! Best mod ever

_________________

small update today
got my coolent hose through so ive connected it all up.
ive bypassed the heater matrix and modded the front pipe to fit ( only a temp fix untill i can get some proper metal pipe work )
tried to start it but the battery is knackered will just about turn over.
got to start pulling my finger out now as i havent got long to finish it before i move with work to norfolk
routh ht plan for next week
monday - swap over rear beams and suspension / fit front suspension (start engine)
tuesday - finish suspension and polybush lower arms
wednesday - fit mondeo front brakes or dry fit exhaust

getting there

good luck with the engine starting, when it fires it'll be like music to your ears