went there yesterday because i am not happy what he has done to my car i have had nothing but problems with the map on it been there 3 times and not going to let him touch her again.

He said someoen has been tampering with the throttle setting i said no ones touched it, its the way you have mapped it, i wnert back on behalf of what some guys said on here. My car was prodcuing 175 bhp isaid im not really happy with the result and i found out his rollers were never calibrated. I have been robbed a monkey could of mapped it better.

Not a place i recomend evildes was right bout him, he told me 6 monthd ago my engine was strong this was before the throtlte bodies was fitted and now he is saying the engine is knackered why do a throttle bodies conversion on a knackered engine. He was saying the engien was burning oil but it hasnt used a drop in 3 monthsi have been driving it

Do you guys think hes been tampering with the graphs becuase it looks a load of crap some of my mates have said. My mate said if that was his car he wouldnt be very happy with it only producing 175bhp they want to seing better result i been told go to hitech motorsport in dudley i wont let this guy touch my car again what you guys think appreciate your comments maybe should of listned to you guys

weston performance in Birmingham were very good for the mr2oc and have a dyno dynamics rolling road.

_________________

cheers m8 what do you make of this story telling me the engine is knackered and stuff

my m8 drove it whos a mecanic and he said there fuck all wrong with the engine he even said its has way morepower than 175 bhp

Aldons Automotive mate in brielly hill brettle lane they have been around for a long time i have been there before for various things and so have alot of my friends! they are very good with zetecs they tune all the westfields and kit cars and hill climbing cars i seriously recomend them if you can get to the dudley area!

Tim

_________________

like timmy said mate, Aldon Automotive is where you wana take it. i had my esc si took there for a chip n map n it came back runnin sweeter than ever, they.ve bin around for atleast twenty years a bloke i work with is 42 n he used them wen he was 20. haha they're very well known in the ford scene. everythin from lotus twin cam lumps upto the new ford stuff.
theyre based in brierley hill dudley just up the road from Merry Hill Shopping Centre.

ive always heard nothin but bad things about sids tune shop, even when he was based behind Midland Performance Centre (MPC) in Walsall. alot of people told me to steer clear of that place. looks like uve bin stung too mate.

hope u can get it sorted chap

_________________

TAY

yep two rite i have been stung m8 my dad said take it back i siad i aint going near the palce i mean the rubber hoses the throttle bodies have been cut too short and basically the throttle bodies have been coming out of them i am not all pleased by him or his crap mapping ill be paying a vis to aldon automotive m8 cheers how much do u think itll cost for them to adjust the map on the omex 600 ecu

not sure on prices for specific management but if u go on their website you might get the info you need dude : http://www.aldonauto.co.uk/shop/

_________________

TAY

http://www.volkszone.com/VZi/showthread ... 357&page=2

shuld of listened to des

thsi is a thread ive found on his crap work

do you tay thik this is dodgey my car was 150 bhp before and i had omex ecu put on it and throttle bodies and onlky got an extra 20 bhp tell ya what that 200lbs torque thread was a complete joke and you guys were right i have to admit that

lmfao

its says it all doesnt it. wot a pecker. another unlucky guy.

_________________

TAY

aldons is only 20 mins from my house too, looks like i'll be taking the rs there when its up and running!!!!

_________________


FEED ME MORE!!!!

Sounds abit shite, I wouldnt bother going back, cut your losses and take it somewhere to be mapped. Will cost you a good few hundred+ to get it mapped.. but atleast it will be done properly.

Your engine could end up being nackered if you don't get it mapped properly, as you never know how crap he might have mapped it.

Even so, you'd be lucky to push 200bhp anyway.

Was it 150bhp before you fitted the OMEX system? I take it you must of had some sort of chip on the ford ecu, otherwise I also doubt you engine had 150bhp before.

_________________
Daily isn't so Special. And it makes me sad.
Need space and time and I'll crack on with Jams si!

Catch me on Facebook as I'm rarely on here.

i hope for god sake he has not knackered my engine when i start the car up it turns over then it like kicks back and then after bit will start can safely safe will be getting it mapped by somoene who knos what there doing

Should have really checked it out beforehand?

To be honest, the name Wild Sids Tune Shop didnt sound too great to me before I opened the thread!!

_________________
Daily isn't so Special. And it makes me sad.
Need space and time and I'll crack on with Jams si!

Catch me on Facebook as I'm rarely on here.

not a sub division of M.Mouse enterprises is it?

_________________
Daily isn't so Special. And it makes me sad.
Need space and time and I'll crack on with Jams si!

Catch me on Facebook as I'm rarely on here.

why is this in members gallery?

_________________

good point... but also.. who cares

_________________
Daily isn't so Special. And it makes me sad.
Need space and time and I'll crack on with Jams si!

Catch me on Facebook as I'm rarely on here.