hi all.
i heard a very peculier sound coming from my recently purchased si at the weekend and have been informed by a very knowlegable freind that a drivers side engine mount has com slighty loose.

now at first i was slightly worried but my friend said its not to hard a job if u have a cupple pf hours handy, and a dry day lol.

unfortunatly my friend has goe 2 australia 2 get married so wont b able to help anytime soon.

is this a hard job people, im not worried to have a go but if it is a bit advanced then im guna have to shell out sum money, and id prefer not to?

cheers guys and gals, any advice appreciated : )

i'm assuming its the drivers front engine mount?

if so, jamiecliffe1988 and i had to partly remove his on saturday**, the top section that mounts to the alt/pas bracket was pretty easy to do, its the lower half thats a paint, as i think its got 2 bolt in the bay and then 2-4 bolt in hte inner wing area, so is a bit awkward to get to

have you got a haynes manual handy?


** we put an axle stand with a bit of wood under the sump as a precaution

easy as anything, just have a trolley jack to support engine underneath (use a blcok of wood between jack and sump though) whip the bolts off remove mount, putin new mount and bolts, remove jack. shouldnt take you more than an hour as a novice

_________________

rs2k powerd escort mk4.....figured id be different!
http://WWW.S2RS.CO.UK

cheers guys. at least i no i can probs handle it. which allows more money 4 mods. shweeeet.