Updates:
Replaced the metal strip the front windows sit in (along the bottom of the glass) as the existing ones...didn't exist. Rusted away to nothing. Ben had bought replacements but never fitted them. This means that the windows now go up, and down. Without the metal base the winder arm had nothing to attach to.
Old and new:
Also replaced the drivers side flip window (triangle one at the front) as the lock button had broken off a long time ago. Again, Ben had bought 2 doors (off a Grand Wagoneer) just for these parts (as far as i can tell). Also replaced the rubber seals that go along the top of the door where the glass goes through, will keep the rain out of the doors.
Old and new. (old is just the clips, on a bit of wood to show what was left!)
I've sourced headlight trims (the brackets that hold the headlights in) from a couple of mates on the Jeep Forums. Ended up up with 2 pairs (two mates), cost me a fiver. Front grille is back on, and the surrounding chrome trim. Ben had bought 2 round headlights, which i think he was going to put in the spaces inside of where the regular lights sit (see pic). I'll make sure this is done, as he wanted. However, The 3 pairs of other driving lights will probably not get mounted, as this would mean 2 headlights, 2 grille mounted driving lights, plus 6 extra driving lights = 10 lights! Its a Jeep not a Vespa!
Original seats back in, electric motors working (moves the seat back and front, up and down).
Removed the headliner, had a look at the rust damage underneath. Surprisingly, not too bad (IMO). The damage has not spread further than just around the holes. The rest of the roof is (mostly) still in good shape.
Also had the angle grinder (with rust/paint pad) removing some of the outside body rust/bubbled paint. Got a bit worried to find 1/2" of bondo on the rear right corner, but was only filling a small dent, not a hole. Removed it all and have applied hammerite to the steel, as a temporary measure to protect it from further rust damage.
And finally, have rebuilt Freddie's 'tent' into a more practical carport. Double layer of tarps, supported by wooden staves and running the full length of the body, giving him better protection from the rain. Still a temporary structure whilst i collect the parts for a proper carport. And he is going to spend the winter indoors, in a barn (unless a miracle happens and his bodywork is fixed and painted in the next 2 months).
Login
Register
Main Website
Search
looks a bit of a beast!
