| Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
| Mk2 2.0 on bike carbs - could be a project for someone https://www.fiesta-si.com/forums/viewtopic.php?f=91&t=24342 |
Page 1 of 2 |
| Author: | - Danny Boy - [ Mon Aug 20, 2012 1:07 pm ] |
| Post subject: | Mk2 2.0 on bike carbs - could be a project for someone |
Near me too. Not sure I have seen it around though, but there are a couple of mk2's with 2.0 and they are pretty quick lol |
|
| Author: | bensouthport [ Thu Aug 23, 2012 12:07 pm ] |
| Post subject: | Re: Mk2 2.0 on bike carbs - could be a project for someone |
nice and cheap too. bike carbs interest me... |
|
| Author: | - Danny Boy - [ Thu Aug 23, 2012 12:58 pm ] |
| Post subject: | Re: Mk2 2.0 on bike carbs - could be a project for someone |
Throttle bodies ftw |
|
| Author: | EvilDes [ Thu Aug 23, 2012 1:29 pm ] |
| Post subject: | Re: Mk2 2.0 on bike carbs - could be a project for someone |
Quad throttle bodies FTW... (Pulsar already has this setup) I just don't see the appeal of mk1 and mk2 Fiesta's though. It's the same with Mini's. Not a fan. |
|
| Author: | - Danny Boy - [ Thu Aug 23, 2012 1:51 pm ] |
| Post subject: | Re: Mk2 2.0 on bike carbs - could be a project for someone |
I think if you get one that looks right it can be a stunning little car, but one like above - looks shite, but someone could make it look nice. All depends on personal taste though I guess! |
|
| Author: | bensouthport [ Thu Aug 23, 2012 2:05 pm ] |
| Post subject: | Re: Mk2 2.0 on bike carbs - could be a project for someone |
yeah, wheels dont suit it and i dont like the arches or skirts. whats the difference/gains between throttle bodies and bike carbs? |
|
| Author: | - Danny Boy - [ Thu Aug 23, 2012 2:26 pm ] |
| Post subject: | Re: Mk2 2.0 on bike carbs - could be a project for someone |
Bodies are more fuel efficient and eco friendly plus easier to tune. Also you can bascially slap them on and keep the ECU and sensors. Carbs require you to adjust fueling and the way the fuel is delivered, they are harder to tune because you have to change all the jets to get more power ect - money and time wasted.. Both are good, but bodies are easier and better in long term 
|
|
| Author: | Ry [ Thu Aug 23, 2012 4:14 pm ] |
| Post subject: | Re: Mk2 2.0 on bike carbs - could be a project for someone |
I want a bodies setup alongside my turbo setup but it just isn't cost effective for me and benefits just aren't there now I'm not N/A (throttle response being a big gain) but this thread reminds me that I do want to do some crazy like supercharge my turbo'd vtec lump. |
|
| Author: | - Danny Boy - [ Thu Aug 23, 2012 4:54 pm ] |
| Post subject: | Re: Mk2 2.0 on bike carbs - could be a project for someone |
Supercharger and turbo and vtec... good little combo that! How many people have gone down that route before with tegs? |
|
| Author: | Ry [ Thu Aug 23, 2012 7:05 pm ] |
| Post subject: | Re: Mk2 2.0 on bike carbs - could be a project for someone |
Not many as it still doesn't yeild beneficial gains unless there's a lot of R&D/tuning with the setup, it's more something to do to stand out from the crowd than anything else. Wouldn't mind a few mag features when it's all done! |
|
| Author: | bensouthport [ Sat Aug 25, 2012 8:26 pm ] |
| Post subject: | Re: Mk2 2.0 on bike carbs - could be a project for someone |
bodies are very loud though arent they? i know this sounds stupid but i thought with turbo and supercharger it was either or and you couldnt have both? |
|
| Author: | - Danny Boy - [ Sat Aug 25, 2012 8:32 pm ] |
| Post subject: | Re: Mk2 2.0 on bike carbs - could be a project for someone |
So are carbs lol. You can have both
|
|
| Author: | bensouthport [ Sat Aug 25, 2012 8:35 pm ] |
| Post subject: | Re: Mk2 2.0 on bike carbs - could be a project for someone |
lol cool thats sweet. must be an expensive process i bet |
|
| Author: | - Danny Boy - [ Sat Aug 25, 2012 8:43 pm ] |
| Post subject: | Re: Mk2 2.0 on bike carbs - could be a project for someone |
Yeah it generally is, but at least you can brag to all the saxo boys in halfords at night that you have a turbo and a supercharger and your car produces 1 million horsepower - because they will never know thats not true 
|
|
| Author: | bensouthport [ Sat Aug 25, 2012 10:57 pm ] |
| Post subject: | Re: Mk2 2.0 on bike carbs - could be a project for someone |
haaha shout danny. sounds epic. in terms of money, how much would we be talking here? what sort of engine would have to be sourced to begin the build? obviously everything would need uprating etc but i could win the lottery one day
|
|
| Author: | - Danny Boy - [ Sun Aug 26, 2012 12:39 am ] |
| Post subject: | Re: Mk2 2.0 on bike carbs - could be a project for someone |
Money wise - depends how cheap you get the parts and that, anything between £1,000 and £10,000, maybe more. All depends how in depth and that you want to go of course. You could do a turbo and supercharged zetec build if you wanted. Superchargers have been fitted to them before, I researched it all at one point, to get a decent kit its about £2000-2500 I think, might be wrong though. So add a £1,000 basic turbo conversion on that and you are already at £3500, then all the fabrication work and all the other bits and bobs, uprating parts ect ect, you'll soon be pushing £5,000. But as I said, depends on many things, you might be able to do it for £1000 all in if you did everything on the cheap and what not. |
|
| Author: | bensouthport [ Mon Aug 27, 2012 5:38 pm ] |
| Post subject: | Re: Mk2 2.0 on bike carbs - could be a project for someone |
yeah but surely doing it cheap = problems? its a lot of money but if you spread it over a length of time im sure it would be worth it! |
|
| Author: | - Danny Boy - [ Mon Aug 27, 2012 5:53 pm ] |
| Post subject: | Re: Mk2 2.0 on bike carbs - could be a project for someone |
Depends what you get done cheap and how handy you are I guess |
|
| Author: | bensouthport [ Mon Aug 27, 2012 5:55 pm ] |
| Post subject: | Re: Mk2 2.0 on bike carbs - could be a project for someone |
true. looks like it will be camms and a remap for the future for me then 
|
|
| Author: | - Danny Boy - [ Mon Aug 27, 2012 6:10 pm ] |
| Post subject: | Mk2 2.0 on bike carbs - could be a project for someone |
Remember you'll need some really high lift cams because 2.0 ones are essentially high lift. If you want more power, focus on the air in/out and fuelling. Decent inlet and exhaust system will do wonders for power. Mark on ft made something like 143 bhp with his fiesta, all he has is a focus 2.0 inlet and a 4-1 manifold and cat back system
|
|
| Page 1 of 2 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|