| Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
| my brothers festa https://www.fiesta-si.com/forums/viewtopic.php?f=5&t=495 |
Page 1 of 2 |
| Author: | Keneth [ Tue Apr 12, 2005 7:21 pm ] |
| Post subject: | my brothers festa |
few pics of brothers fiesta he's got a few mods ( most of which came from my old si wot i smashed head on in to a transit van at 65mph lol) 16' wheels g max springs and shocks lowered 60mm si interior s/s exhaust with box removed momo steerin wheel bit of ice i know its not an si but he's not been past long let me know wot you think 
|
|
| Author: | L99RTM [ Tue Apr 12, 2005 8:16 pm ] |
| Post subject: | |
That looks real tidy! A good way to start....reminds me off when i started!! keep going! |
|
| Author: | jdfiesta [ Tue Apr 12, 2005 9:58 pm ] |
| Post subject: | Re: my brothers festa |
| Author: | Keneth [ Tue Apr 12, 2005 10:52 pm ] |
| Post subject: | |
| Author: | Paul [ Wed Apr 20, 2005 10:20 pm ] |
| Post subject: | |
| Author: | jdfiesta [ Thu Apr 21, 2005 12:41 am ] |
| Post subject: | |
| Author: | jimbob [ Thu Apr 21, 2005 11:43 am ] |
| Post subject: | |
i was thinkin of dropping a 1.6 in it 
just acn't afford it at the minute 
should have a bigger engine in it soon though nice!! |
|
| Author: | Paul [ Thu Apr 21, 2005 6:26 pm ] |
| Post subject: | |
saw a 1.6zetec engine on ebay from a festa go for about 200 quid.. thats quite cheap if u ask me
|
|
| Author: | Keneth [ Thu Apr 21, 2005 8:00 pm ] |
| Post subject: | |
i can get 1.6 zetec's for ?100 and 2.0l with ecu, throttle body and mass air flow for ?250
|
|
| Author: | jdfiesta [ Thu Apr 21, 2005 11:17 pm ] |
| Post subject: | |
where from? do they run? might be interested JJ |
|
| Author: | Keneth [ Sat Apr 23, 2005 5:25 pm ] |
| Post subject: | |
| Author: | jdfiesta [ Sat Apr 23, 2005 6:23 pm ] |
| Post subject: | |
| Author: | Paul [ Sun Apr 24, 2005 2:33 am ] |
| Post subject: | |
 Cheap as chips!
I'll take a 2l mondeo engine off your hands for ?250!! Got to have some major structural welding done first, i wouldnt be too worried about brakes myself. Do you usually "uprate" the rad? or is it fine to keep a std. radiator? |
|
| Author: | Keneth [ Sun Apr 24, 2005 10:07 am ] |
| Post subject: | |
i have got a standard rad but the coolent does stay rather hot all the time i would be bothered bout brakes you always gotta stop some time i have 4x4 cossie brakes all you do is fit the disc's and space the carrier with washers so its even either side of the disc it was scary on standard brakes |
|
| Author: | jdfiesta [ Sun Apr 24, 2005 10:51 am ] |
| Post subject: | |
| Author: | Paul [ Sun Apr 24, 2005 6:05 pm ] |
| Post subject: | |
huh? My sills mainly.. Actually worried they will just fall apart on me. Previous owner did a good job of fillering over every single spot of rust without treating it, and sprayed over with a tin. Now when i jack it up etc.. Crunch crack crap. 
Anyway if you were serious about the 2l engine gimme a pm and ill come have a look sometime? Thanks |
|
| Author: | Keneth [ Sun Apr 24, 2005 6:43 pm ] |
| Post subject: | |
i havn't got the engines its a ford scapper who i know he does us trade cause we have had a few engines off him he's got loads of 2.0l's sat about really sound bloke jdfiesta i dont think he's for from you, how is the car goin
|
|
| Author: | Paul [ Sun Apr 24, 2005 7:35 pm ] |
| Post subject: | |
|
Well if your still looking at this forum in a couple of months ill give you a bell? if thats alright? About the brakes.. You used original pad carrier? I may well buy myself some of these discs What pads you got in atm? |
|
| Author: | Keneth [ Sun Apr 24, 2005 8:06 pm ] |
| Post subject: | |
you use 4x4 cossie carrier, caliper's, disc's and pads must be 4x4 as 2wd are different ofset they stop me fine rear disc comin soon hopfully
|
|
| Author: | Keneth [ Sun Apr 24, 2005 8:11 pm ] |
| Post subject: | |
my brakes 280mm behind 16s 
|
|
| Page 1 of 2 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|