After getting the Tarox Monza's bed in and biting finally, I took a look at the calipers and discs, and they looked decidedly shonky. So, I took a quick trip round Halfords, for some axle stands, 2 tins of Hammerite, and some sandpaper.
Starting with the drivers side:
After 2 coats of black round the disc centres, and 2 coats of silver on the calipers:
(Excuse the rust on the actual discs, the car has been sat for a week doing nowt on my drive)
Passenger side (Worst of the 2):
And again, after paint:
Then, just cus I was underneath, took a few of the chassis, dunno why. But it looks fairly clean for 7 years old
I know it aint much to most of you, but I keep doing little bits, and it makes me kinda proud, I aint the most mechanically minded person in the world, so this is like a big learning curve.
Cheers, Guy
.
