Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
My 1.25 SI https://www.fiesta-si.com/forums/viewtopic.php?f=5&t=24059 |
Page 1 of 2 |
Author: | Valleys Focus [ Fri May 18, 2012 11:04 am ] |
Post subject: | My 1.25 SI |
I picked up this little fiesta on the 18th of may, It was cheap and needed a few repairs, Its a Fiesta mk4 1.25 Si 3 Door its done 97,000k and Now its has a zs kit and 47k puma lump Well heres the pictures (when i got it) ![]() ![]() Heres what its looking like roughly now.... ![]() ![]() Engine (Needs driveshafts and water hoses fitted before start-up) · Ford Zetec-Se 1679cc 16v · S/S 4-2-1 manifold · NGK spark plugs · PiperX Cone · 60mm Cold Air Feed · FSE Power Boost Valve · Blue Alloy Oil Catch Tank · Magnetic Sump Bolt · K&N Oil Filter · Castrol 5w30 Fully Synthetic Oil Transmission · IB5 Puma Gearbox · 220mm Clutch Kit · Millers 75w 90 Fully Synthetic Oil Suspension ·Gmax 60mm Springs ·Mk5 Rear Beam ·Zs Rear Shocks ·Polybush Rear Bushes ·Focus ST Rear Hubs ·12mm Rear Spacers ·Omp Front Upper Strut Brace ·Omp Front Lower Strut Brace Wheels,Tyres And Brakes ·Pro Race 15" 7j Alloys ·195/45 Buget Tyres ·300mm ST170 Brakes ·280mm ST170 Brakes Interior ·Stripped Rear ·Sparco 4 Point Harness ·Puma Gear Knob ·Puma Clock Surround ·JVC Cd Player ·Max Blue Trim Floor Mats Exterior ·De-wipered Rear ·De-Side Strips ·De-baged ·6000k H7 And H1 Headlight Bulbs ·Led Side Lights ·Smoked Rear Lights ·Chrome Indercator bulbs ·Zs Rear Bumper ·Zs Side Skirts ·Ford Racing Bonnet Spacers ·Aftermarket Front Upper Grill ·Focus Twin Horn ·Lots Of Stickers Future Plans Rear Strut Brace Cat Back Exhaust 205/50 Semi Slicks Mocal 10 Row oil Cooler with 1/2 connections (all got bar Oil cooler its self) Bonnet Pins Boot Pins Poly Windows Ford Sticker Black Sun Strip Smoked Head Lights Remove Sound Tar From Shell After Market Steering Boss And Wheel Corbeau Bucket seats (got) Corbeau Sub Frames Lightened Flywheel Blue Coolant Hose Kit Blue HT Leads Blue Rocket Cover Track Times: 2012 Llandow Ciruit 1:06.3 (VW) (1.25 Damaged P/S Wishbone, Std Spec) ![]() There mabye more plans but my other cars come first. Thanks for looking all comments welcome |
Author: | - Danny Boy - [ Fri May 18, 2012 11:19 am ] |
Post subject: | Re: My 1.25 SI |
Welcome to the forum. Nice odd wheel trims lol. Rust looks quite bad, it might be worth taking up all the rubber seals around the door to see if its creaped in around there too and make sure there are no holes. Will be worth getting on top of it all too ![]() Plans sound good. Escort gti wheels would be better than mondeo ones imo. Mondeos are too big. Black bonnet/roof/spoiler - chavtastic. Wouldn't really bother with that. Other than that, sounds like you've got your hands full. |
Author: | meilack [ Fri May 18, 2012 11:22 am ] |
Post subject: | Re: My 1.25 SI |
before anything go on a big rust hunt |
Author: | Valleys Focus [ Fri May 18, 2012 12:49 pm ] |
Post subject: | Re: My 1.25 SI |
Author: | Valleys Focus [ Fri May 18, 2012 12:53 pm ] |
Post subject: | Re: My 1.25 SI |
Author: | - Danny Boy - [ Fri May 18, 2012 1:05 pm ] |
Post subject: | Re: My 1.25 SI |
Those wheels would be better ![]() |
Author: | Dave G fsi [ Sat May 19, 2012 11:52 am ] |
Post subject: | Re: My 1.25 SI |
Welcome to the site ![]() Nice car, and good list of plans ![]() |
Author: | brit-fez [ Sat May 19, 2012 2:29 pm ] |
Post subject: | Re: My 1.25 SI |
Author: | The Loumiester [ Sat May 19, 2012 3:56 pm ] |
Post subject: | Re: My 1.25 SI |
Nice motor, look forward to seeing progress. What focus's you got? Any pics? |
Author: | Percy [ Sun May 20, 2012 8:17 pm ] |
Post subject: | Re: My 1.25 SI |
Welcome, will be good to see a 1.6 tuned Mk4, will be a bit of a sleeper. |
Author: | Valleys Focus [ Sat Aug 04, 2012 5:16 pm ] |
Post subject: | Re: My 1.25 SI |
Thanks All ![]() Well there has been some changes to the list above and to the car and Sorry for not posting up i havnt been able to get on here site kept saying my username wanst on here :/ Engine (Needs driveshafts and water hoses fitted before start-up) · Ford Zetec-Se 1679cc 16v · S/S 4-2-1 manifold · NGK spark plugs · PiperX Cone · 60mm Cold Air Feed · FSE Power Boost Valve · Blue Alloy Oil Catch Tank · Magnetic Sump Bolt · K&N Oil Filter · Castrol 5w30 Fully Synthetic Oil Transmission · IB5 Puma Gearbox · 220mm Clutch Kit · Millers 75w 90 Fully Synthetic Oil Suspension ·Gmax 60mm Springs ·Mk5 Rear Beam ·Zs Rear Shocks ·Polybush Rear Bushes ·Focus ST Rear Hubs ·12mm Rear Spacers ·Omp Front Upper Strut Brace ·Omp Front Lower Strut Brace Wheels,Tyres And Brakes ·Pro Race 15" 7j Alloys ·195/45 Buget Tyres ·300mm ST170 Brakes ·280mm ST170 Brakes Interior ·Stripped Rear ·Sparco 4 Point Harness ·Puma Gear Knob ·Puma Clock Surround ·JVC Cd Player ·Max Blue Trim Floor Mats Exterior ·De-wipered Rear ·De-Side Strips ·De-baged ·6000k H7 And H1 Headlight Bulbs ·Led Side Lights ·Smoked Rear Lights ·Chrome Indercator bulbs ·Zs Rear Bumper ·Zs Side Skirts ·Ford Racing Bonnet Spacers ·Aftermarket Front Upper Grill ·Focus Twin Horn ·Lots Of Stickers Heres what its looking like roughly now.... ![]() ![]() |
Author: | Valleys Focus [ Sat Aug 04, 2012 5:37 pm ] |
Post subject: | Re: My 1.25 SI |
And as you can see at the top post now its been updated and ive done one trackday when it was in the condtion i bought it and im doing one again next month with loads of mods and twice the power so we will see if its worth it ![]() Also as asked for heres the pictures of my old focus's (which are now both dead) 5Dr 1.8 Mk1 155bhp which i bought i think 2 years ago (which again i built ground up) 5dr exhaust video http://www.youtube.com/watch?v=w54hFV-l ... vRG5JuSpK6 ![]() ![]() ![]() The 3rd which i bought at the start of this year and killed for this fiesta lol (which again i built ground up) Rear ![]() Front ![]() Engine gone ![]() ![]() Inside view ![]() ![]() 2.0 zetec-r which i hand built my self ground-up ![]() My poly windows ![]() ![]() ![]() And before those two i had a fiesta zs which had abit sort of 8k spent on it in performance parts ![]() |
Author: | Spunkymonkey [ Sat Aug 04, 2012 8:07 pm ] |
Post subject: | Re: My 1.25 SI |
Grand motor! Good plans! ![]() What did you need for the 1.25 to 1.7 conversion? |
Author: | Valleys Focus [ Sun Aug 05, 2012 12:05 am ] |
Post subject: | Re: My 1.25 SI |
Author: | The Loumiester [ Sun Aug 05, 2012 9:40 am ] |
Post subject: | Re: My 1.25 SI |
Great progress. |
Author: | Spunkymonkey [ Sun Aug 05, 2012 12:11 pm ] |
Post subject: | Re: My 1.25 SI |
Author: | Valleys Focus [ Sun Aug 05, 2012 9:14 pm ] |
Post subject: | Re: My 1.25 SI |
Author: | Valleys Focus [ Tue Aug 07, 2012 4:26 pm ] |
Post subject: | Re: My 1.25 SI |
Well not much to update, Im getting the car all running and driveable by friday if my new bushes come before then but heres a list of new parts ive either got or coming in the post.... New track rod ends New drop links New wishbone ball joints New Front Wishbone polybushs New Front Spax shocks New Hel braided Brake lines So once there fitted the only part of the suspension i can uprate is the rear shocks then and brake wise would only be uprated pads and discs pointless doing the rears on a fiesta, So all my money will be put into POWER!!! ![]() |
Author: | DANIELP1991 [ Tue Aug 07, 2012 9:44 pm ] |
Post subject: | Re: My 1.25 SI |
god you have transformed that car mate fair doos!! looks great now! i was hoping to take ignis out at llandow but looks like its gonna get cancelled now! |
Author: | Valleys Focus [ Tue Aug 07, 2012 10:19 pm ] |
Post subject: | Re: My 1.25 SI |
Page 1 of 2 | All times are UTC [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |