Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
ollys fiesta si 2.0 (being broken) had enough of it now lol https://www.fiesta-si.com/forums/viewtopic.php?f=5&t=13552 |
Page 1 of 9 |
Author: | olly [ Wed Nov 19, 2008 11:44 pm ] |
Post subject: | ollys fiesta si 2.0 (being broken) had enough of it now lol |
hi im a newbie so thought i would chuck up some pics of my car and ask a few quick questions so the car fiesta si mondeo 2.0 on twin 40 webbers lowered 60mm on springs bigger dics facet fuel pump some presure reg thing 15" kahn wheels 2x sprint bucket seats 2x luke harnesses striped (some more to do) battery in the boot and cut off switch and fuel pump switch in dash delocked boot with bonnet pins delocked bonnet and bit choped off with bonnet pins and raised aswell heres there car ![]() ![]() ![]() ![]() ![]() plans now are stright thought exhaust flat bottom car and make diffuser and take sound deadening out done a little bit but time consuming right some question if you dont mind probly hear this so many times before but whats the best brakes for it and also pretty easy to fit and has anyone ever choped a bit out back bumper and made a difuser and flat bottomed the car im thinking of doing this also going to put some kanards(spelling) on the front bumper as past 110 front lifts up not that ive done that speed ermmm lol so has anyone done this thanks for reading olly |
Author: | Trissy_si [ Wed Nov 19, 2008 11:50 pm ] |
Post subject: | Re: hi newbie my si 2.0 |
Welcome nice si there with some good mods, do you use it on track? |
Author: | olly [ Wed Nov 19, 2008 11:52 pm ] |
Post subject: | Re: hi newbie my si 2.0 |
will be going on track havent owned it that long and i have been out of work so it hasnt been on the road 50p a mile to run so was a lil expensive lol |
Author: | onslack [ Thu Nov 20, 2008 12:00 am ] |
Post subject: | Re: hi newbie my si 2.0 |
welcome to fsi olly ![]() swear i've seen that car before, i think the previous owner might of been a member on here as well will do some digging ![]() car looks ace ![]() |
Author: | olly [ Thu Nov 20, 2008 12:01 am ] |
Post subject: | Re: hi newbie my si 2.0 |
it had fiestaturbo stickers if that helps |
Author: | olly [ Thu Nov 20, 2008 6:59 pm ] |
Post subject: | Re: hi newbie my si 2.0 |
can anyone help on the questions?? probly hear this so many times before but whats the best brakes for it and also pretty easy to fit and has anyone ever choped a bit out back bumper and made a difuser and flat bottomed the car im thinking of doing this also going to put some kanards(spelling) on the front bumper as past 110 front lifts up not that ive done that speed ermmm lol so has anyone done this |
Author: | onslack [ Thu Nov 20, 2008 7:03 pm ] |
Post subject: | Re: hi newbie my si 2.0 |
the usual option people fit are cossie 4x4 stuff that requires 5mm spacers to get the carries to fit right the easiest set up to fit would be the fiesta ST150 set up, there's a guide in the guides section on how to it them ![]() i'll find a cossie 4x4 fitting guide too for you ![]() |
Author: | onslack [ Thu Nov 20, 2008 7:06 pm ] |
Post subject: | Re: hi newbie my si 2.0 |
Author: | happypaul [ Thu Nov 20, 2008 7:24 pm ] |
Post subject: | Re: hi newbie my si 2.0 |
Nice but please get rid of that towing eye thing out the bonnet ![]() Also front end lifting up at 110.. ![]() |
Author: | olly [ Thu Nov 20, 2008 9:03 pm ] |
Post subject: | Re: hi newbie my si 2.0 |
thanks for that onslack will go looking ![]() 110 thats when it got bad it starts at 100ish at 145ish i got that scared i had to back off and it was still pulling quick little cars really want to get it on track but going to try and up the handling mods even though it isnt bad to say it got a 2litre up front thats why im asking if anyone flatbottomed the car to see if that works as in F1 (a bit faster than a fiesta i know) it pulls them to the floor and have a diffser popping out the back and then the kanards to push the front end down at speed i would like a diffser and then exhaust tip just poping out from that was also thinking how much power can these engines push out without turbo/supercharger mods |
Author: | olly [ Thu Nov 20, 2008 9:07 pm ] |
Post subject: | Re: hi newbie my si 2.0 |
also one more i think this is last question can you get stand alone or any sort of rev limiter for carbed engines |
Author: | will121 [ Thu Nov 20, 2008 11:33 pm ] |
Post subject: | Re: hi newbie my si 2.0 |
Author: | Dave G fsi [ Fri Nov 21, 2008 8:24 pm ] |
Post subject: | Re: hi newbie my si 2.0 |
That is a mint looking car you've got there mate, Sounds like a weapon! Love the wheels you've got on it too, suit it really well ![]() |
Author: | olly [ Mon Nov 24, 2008 1:21 am ] |
Post subject: | Re: hi newbie my si 2.0 |
Author: | Andyfloss03 [ Mon Nov 24, 2008 2:40 pm ] |
Post subject: | Re: hi newbie my si 2.0 |
love it apart from the thing sticking out the bonnet ![]() |
Author: | olly [ Mon Nov 24, 2008 10:38 pm ] |
Post subject: | Re: hi newbie my si 2.0 |
yeah the towing eye out the bonnet not to everyones taste but if i take it off just going to have a hole there |
Author: | Andyfloss03 [ Tue Nov 25, 2008 10:32 am ] |
Post subject: | Re: hi newbie my si 2.0 |
new bonnet ![]() |
Author: | Dave G fsi [ Sat Nov 29, 2008 12:14 am ] |
Post subject: | Re: hi newbie my si 2.0 |
Put an RST bonnet on it while your at it too! ![]() ![]() |
Author: | sk8xtrm [ Sat Dec 13, 2008 12:31 pm ] |
Post subject: | Re: hi newbie my si 2.0 |
![]() i wouldn't bother with the cossie brakes mate, correct me if im wrong but didn't the old owner fit 4 pot high spec brakes. im sure i can still see a little sneak of them behind the wheel! I remember this car mate very well! i was close to buying it myself! ![]() |
Author: | olly [ Sat Dec 13, 2008 2:34 pm ] |
Post subject: | Re: hi newbie my si 2.0 |
theses are the brakes that are on it ![]() so what sort are they |
Page 1 of 9 | All times are UTC [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |