| Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
| fiesta wings https://www.fiesta-si.com/forums/viewtopic.php?f=4&t=8701 |
Page 1 of 2 |
| Author: | vw_99 [ Fri Sep 21, 2007 4:49 pm ] |
| Post subject: | fiesta wings |
| Author: | xmadxmoex [ Fri Sep 21, 2007 5:17 pm ] |
| Post subject: | |
| Author: | fiestasiphil [ Fri Sep 21, 2007 7:23 pm ] |
| Post subject: | |
to get them off u have to take off the front bumper, 
then drill out the spots welds (i f u can't see them there is probably filler over so rub the top of the wing down to find the spot welds 
then use a chisel and a hammer and prise the lip up of the wing 
then get a angel grinder the slice it down the front of the wing there it meets the front slam panel and at the bottom of the wing and off it comes 
hope it helps |
|
| Author: | vw_99 [ Sat Sep 22, 2007 11:50 pm ] |
| Post subject: | |
cheers 4 eh help thats wat i thot bt no sure on gtn it on do i jst weld it or gt selftappers soz bt im burst bt im very gratful 4 help |
|
| Author: | ChubbyJon [ Sun Sep 23, 2007 10:22 am ] |
| Post subject: | |
| Author: | alexgotaSI [ Sun Sep 23, 2007 9:04 pm ] |
| Post subject: | |
| Author: | Kram [ Sun Sep 23, 2007 11:17 pm ] |
| Post subject: | |
| Author: | happypaul [ Sun Sep 23, 2007 11:20 pm ] |
| Post subject: | |
| Author: | fiestasiphil [ Mon Sep 24, 2007 12:03 am ] |
| Post subject: | |
i don't know really as the wings aren't a stuctural part, welded would b way better tho as thats how ford done it, they must have welded them on for a reason
|
|
| Author: | alexgotaSI [ Mon Sep 24, 2007 1:14 pm ] |
| Post subject: | |
thats true it is not a structual part, many other cars have wings bolted on and no welds. yes welds will be safer, im bolting mine on until i can get hold of a MIG, but i cant see how it would be a MOT fail and how it is unsafe?? if done right it should be fine. |
|
| Author: | Mole259 [ Mon Sep 24, 2007 1:58 pm ] |
| Post subject: | |
Because i would of thought that it affects how the car damages during a crash or something similar i.e. being hit from man different angles Literally it was designed to be welded for a reason, it wont look good if you change the way it goes together from the manufacturer standard, its just how the MOT people will look at it Some may be kind, some may just stick the boot in for it, welded is shafe 
|
|
| Author: | onslack [ Mon Sep 24, 2007 2:51 pm ] |
| Post subject: | |
| Author: | ChubbyJon [ Mon Sep 24, 2007 4:09 pm ] |
| Post subject: | |
| Author: | onslack [ Mon Sep 24, 2007 4:16 pm ] |
| Post subject: | |
| Author: | alexgotaSI [ Mon Sep 24, 2007 4:25 pm ] |
| Post subject: | |
lol well ive bolted the tops and welded it onto the valance... |
|
| Author: | happypaul [ Mon Sep 24, 2007 4:29 pm ] |
| Post subject: | |
| Author: | mike2530 [ Mon Sep 24, 2007 8:08 pm ] |
| Post subject: | Wings |
| Author: | ChubbyJon [ Mon Sep 24, 2007 8:14 pm ] |
| Post subject: | Re: Wings |
| Author: | alexgotaSI [ Mon Sep 24, 2007 10:11 pm ] |
| Post subject: | |
| Author: | john_d [ Tue Sep 25, 2007 7:44 pm ] |
| Post subject: | Re: Wings |
| Page 1 of 2 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|