| Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
| sills and engine https://www.fiesta-si.com/forums/viewtopic.php?f=4&t=8404 |
Page 1 of 1 |
| Author: | lookintheglass [ Thu Aug 23, 2007 11:17 am ] |
| Post subject: | sills and engine |
didnt want to make 2 posts so thort these were kin of in the right place, ive tried searching for a guide to get a 2 litre engine in the 1.4 si, not the 1.6. How hard is it going to be do you reckon? and has neone done it before or no neone who has? also, my driverside sill is rusting bad, is welding going to b the solution or can i get a new one from somewhere? thanx for ne responses 
|
|
| Author: | ChubbyJon [ Thu Aug 23, 2007 11:22 am ] |
| Post subject: | |
If I'm right in saying, you will need a 1.6si as a donor car and as for the sill's, you can buy replacements 
|
|
| Author: | lookintheglass [ Thu Aug 23, 2007 11:29 am ] |
| Post subject: | |
| Author: | ChubbyJon [ Thu Aug 23, 2007 11:31 am ] |
| Post subject: | |
Either Ebay or http://www.fiesta-centre.co.uk/
|
|
| Author: | lookintheglass [ Thu Aug 23, 2007 11:45 am ] |
| Post subject: | |
thanx mate, really appreciate the help
|
|
| Author: | onslack [ Thu Aug 23, 2007 11:46 am ] |
| Post subject: | |
as jon said you'd need a 1.6 Si as a donor car, you need to use the loom and sump and pick up off the 1.6 and a few other bits like pas bracket, inlet, exhaust etc. i think you'd need to refabricate a new mount as the 1.4 and 1.6's have different engine mounts as for the sills, as your are rusting i would get new ones welded in or if the affected area isn't to bad get metal plates welded in |
|
| Author: | Mattyboy Esq [ Thu Aug 23, 2007 1:01 pm ] |
| Post subject: | |
| Author: | lookintheglass [ Thu Aug 23, 2007 2:01 pm ] |
| Post subject: | |
| Author: | ChubbyJon [ Thu Aug 23, 2007 3:56 pm ] |
| Post subject: | |
| Author: | lookintheglass [ Thu Aug 23, 2007 4:14 pm ] |
| Post subject: | |
| Author: | ChubbyJon [ Thu Aug 23, 2007 5:10 pm ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|