removing the spare wheel tray - pros & cons?
will removing it quicken the process rust on the boot floor as i see it as a form of protection for the floor of the boot?
might seem a silly question but it's bugging me
| Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
| didn't know where to put this - spare wheel https://www.fiesta-si.com/forums/viewtopic.php?f=4&t=7621 |
Page 1 of 2 |
| Author: | andyleesy [ Fri Jun 29, 2007 3:20 pm ] |
| Post subject: | didn't know where to put this - spare wheel |
removing the spare wheel tray - pros & cons? will removing it quicken the process rust on the boot floor as i see it as a form of protection for the floor of the boot? might seem a silly question but it's bugging me
|
|
| Author: | onslack [ Fri Jun 29, 2007 3:23 pm ] |
| Post subject: | |
i want rid of mine just to getrid of extra weight 
but i would also like to know this |
|
| Author: | andyleesy [ Fri Jun 29, 2007 3:25 pm ] |
| Post subject: | |
| Author: | xmadxmoex [ Fri Jun 29, 2007 3:26 pm ] |
| Post subject: | |
| Author: | fiestasiphil [ Fri Jun 29, 2007 4:06 pm ] |
| Post subject: | |
probably won't be a problem! but just incase, just slap some underseal on the floor then! 
|
|
| Author: | john_d [ Fri Jun 29, 2007 4:14 pm ] |
| Post subject: | |
i removed mine, now the spare sit it the boot
|
|
| Author: | fiestasiphil [ Fri Jun 29, 2007 4:20 pm ] |
| Post subject: | |
i did it to my si once but the back of the car sat up higher so i put it back on |
|
| Author: | Mouse [ Fri Jun 29, 2007 5:16 pm ] |
| Post subject: | |
there is one thing though if you havent got a spair wheel and your get a puncher oopsie your stuck unless you keep it in the boot i havent got one eather or a spair wheel |
|
| Author: | james_rs [ Fri Jun 29, 2007 6:46 pm ] |
| Post subject: | |
| Author: | fiestasiphil [ Fri Jun 29, 2007 7:10 pm ] |
| Post subject: | |
without spare wheel tray [img]http://i23.photobucket.com/albums/b398/fiestasiphil/2005_1025featurefiesta0017.jpg[/img*] with spare wheel tray 
if you like low i'd keep it in
And if you'd like your pictures to stop getting taken down, bloody resize them!
|
|
| Author: | Dracos [ Fri Jun 29, 2007 7:11 pm ] |
| Post subject: | |
| Author: | xmadxmoex [ Fri Jun 29, 2007 7:30 pm ] |
| Post subject: | |
| Author: | onslack [ Fri Jun 29, 2007 8:06 pm ] |
| Post subject: | |
| Author: | fiestafletch [ Fri Jun 29, 2007 9:09 pm ] |
| Post subject: | |
| Author: | Mouse [ Fri Jun 29, 2007 9:51 pm ] |
| Post subject: | |
| Author: | TANGO [ Fri Jun 29, 2007 10:02 pm ] |
| Post subject: | |
yeah mate halfrauds do it quite cheap or motorworld too, think its called tyreweld!!!! |
|
| Author: | andyleesy [ Sat Jun 30, 2007 1:11 am ] |
| Post subject: | |
| Author: | Jam [ Sat Jun 30, 2007 3:48 pm ] |
| Post subject: | |
the tyre fitter that repairs that puncture after you have put that goo in it wont like you too much..its a slut to get off! and a patch of it will need to be cleaned off if a puncture repair is to be put in and stick properly..and itll make a mess as it sticks to the rim inside... personally id leave the spare on...but thats just me. Jam |
|
| Author: | TANGO [ Sat Jun 30, 2007 3:56 pm ] |
| Post subject: | |
ive heard that them repair cans make the tyre unrepairable once youve put it in them, it was a bmw tech that told me that too and next to none of there cars have a spair wheel!! i personally wouldnt risk it, especially when i buy my F1's, |
|
| Author: | Mattyboy Esq [ Sat Jun 30, 2007 4:35 pm ] |
| Post subject: | |
| Page 1 of 2 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|