| Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
| paint trouble https://www.fiesta-si.com/forums/viewtopic.php?f=4&t=6466 |
Page 1 of 1 |
| Author: | fierceSi [ Wed Apr 18, 2007 7:17 pm ] |
| Post subject: | paint trouble |
I've got a dark blue sqare were people have debadge it and I want to get rid off it and paint it and some how blend it in how can I do this? |
|
| Author: | Op [ Wed Apr 18, 2007 10:02 pm ] |
| Post subject: | |
i take it its of a similar shade to the rest of your car? t-cut, t-cut some more, then t-cut some more around and over the offesnive area and it should blend slightly |
|
| Author: | mike2530 [ Thu Apr 19, 2007 3:59 am ] |
| Post subject: | don't tcut it |
| Author: | xmadxmoex [ Thu Apr 19, 2007 8:24 am ] |
| Post subject: | |
people using g3 without knowing what there doing can do damage to the paint.. id never use g3 on my car for the fact i have no idea and id probably end up taking too much paint off |
|
| Author: | EvilDes [ Thu Apr 19, 2007 8:50 am ] |
| Post subject: | |
T-cut is fine for the odd job, and the amateur, as long as you at least wax afterwards. On my first Fez I had to get a new door. The car was red, the new door was pink lol A bit of graft with the T-cut later, lo and behold, everything matched. Sorted. Get pics of the square though so we can assess properly... |
|
| Author: | fierceSi [ Thu Apr 19, 2007 8:46 pm ] |
| Post subject: | Re: paint trouble |
| Author: | xmadxmoex [ Thu Apr 19, 2007 10:23 pm ] |
| Post subject: | |
looks like thats a patch of glue from a sticker.. will it peel off with a bit of heat? does it seem like a sticker? (does it have a lip you can pick at) |
|
| Author: | mike2530 [ Fri Apr 20, 2007 6:07 am ] |
| Post subject: | Paint |
| Author: | EvilDes [ Fri Apr 20, 2007 7:33 am ] |
| Post subject: | |
| Author: | mike2530 [ Fri Apr 20, 2007 5:49 pm ] |
| Post subject: | T-Cut |
T-Cut will only spead the adhesive residue about but eventually will remove it but nail polish remover, thinners, white spirit or even turps, will remove it easily in seconds with very little effort where as with T-Cut you will be sweating like a pig trying to remove it. |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|