hi
just wondering whether the clutch is adjustable on my fiesta si ??? all i see is and orange plastic thing
near the clutch lever and thats it
i wanna lower bite point if possible
thanks
garry
| Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
| clutch adjuster (how to reset ????))) https://www.fiesta-si.com/forums/viewtopic.php?f=4&t=5837 |
Page 1 of 1 |
| Author: | garry_noble [ Thu Mar 01, 2007 6:54 pm ] |
| Post subject: | clutch adjuster (how to reset ????))) |
hi just wondering whether the clutch is adjustable on my fiesta si ??? all i see is and orange plastic thing near the clutch lever and thats it
i wanna lower bite point if possible thanks garry |
|
| Author: | goaty [ Thu Mar 01, 2007 7:56 pm ] |
| Post subject: | |
| Author: | garry_noble [ Fri Mar 02, 2007 5:43 pm ] |
| Post subject: | |
| Author: | jdfiesta [ Fri Mar 02, 2007 6:14 pm ] |
| Post subject: | |
if you look at your clutch pedal, about half way up it there should be a white knob on it. undo that, what for it to take up tension then tighten. Unl;ess you have auto adjust which is a little more difficult JJ |
|
| Author: | goaty [ Fri Mar 02, 2007 6:23 pm ] |
| Post subject: | |
its an auto |
|
| Author: | xmadxmoex [ Fri Mar 02, 2007 8:12 pm ] |
| Post subject: | |
jd - mine has a white knob and it alsways feels pretty tight.. should i slacken it a bit as i have 2 snap on me within a short space of time |
|
| Author: | jdfiesta [ Sat Mar 03, 2007 1:06 am ] |
| Post subject: | |
with a fresh cable on, undo white knob, listen for it releasing, then tighten back up JJ |
|
| Author: | garry_noble [ Sat Mar 03, 2007 1:09 am ] |
| Post subject: | |
cheers people for the help |
|
| Author: | jdfiesta [ Sat Mar 03, 2007 1:23 am ] |
| Post subject: | |
just noticed your's is an auto Apparently you can manipulate these to adjust when you want them to. On the ratchet and Pawl system within the pedal, if you press the Pawl part so that it releases from ratchet and set it up from there. Not 100% on that though, i just changed mine to manual adjust JJ |
|
| Author: | goaty [ Sat Mar 03, 2007 10:14 am ] |
| Post subject: | |
| Author: | Escort Si-130 [ Tue Mar 06, 2007 1:11 pm ] |
| Post subject: | |
Get yourself a ratchet kit, they wear out after a while, especially the spring; this is noticeable when the biting point is all the way at the floor and it is also sometimes difficult to engage gears. The spring on the auto adjust ratchet wears out after around 100k. |
|
| Author: | garry_noble [ Tue Mar 06, 2007 3:01 pm ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|