1.4's seem like such a pain in the arse
| Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
| exterior loom https://www.fiesta-si.com/forums/viewtopic.php?f=4&t=24779 |
Page 1 of 1 |
| Author: | bensouthport [ Tue Nov 27, 2012 6:03 pm ] |
| Post subject: | exterior loom |
lads. spent an hour today laying the engine loom out and connecting up what i could. this is the bit that im shitting myself about because of what i have to do to make it work (according to fiesta guides). seems as though i have to alter a fair bit. its stuff like changing the main loom plug which connects up to the interior loom because you need certain pins out of that one. and its getting me down big time and making me want to quit because i dont know where to start. the 1.6si loom i got should have all this stuff on so i shouldnt have an issue sourcing it. but i dont know, just stuck! here's the link to fiesta guides, its about 3/4's of the way down to show what i mean. if someone can shed some light or give me a kick up the arse id appreciate it. http://www.fiestaguides.co.uk/content/e ... rsion.html Ben |
|
| Author: | - Danny Boy - [ Tue Nov 27, 2012 6:24 pm ] |
| Post subject: | Re: exterior loom |
One question, are you using a 1.6 interior loom and fusebox or the 1.4 loom and fusebox? |
|
| Author: | bensouthport [ Tue Nov 27, 2012 6:36 pm ] |
| Post subject: | Re: exterior loom |
1.4 loom and fusebox.... please dont say i have to swap the interior looms too? the interior loom i got is chopped up all over the show |
|
| Author: | - Danny Boy - [ Tue Nov 27, 2012 6:40 pm ] |
| Post subject: | Re: exterior loom |
Would be 10,000 times easier to use a 1.6 interior loom yes. Why is it chopped up? |
|
| Author: | meilack [ Tue Nov 27, 2012 6:42 pm ] |
| Post subject: | Re: exterior loom |
1.4's seem like such a pain in the arse
|
|
| Author: | bensouthport [ Tue Nov 27, 2012 6:45 pm ] |
| Post subject: | Re: exterior loom |
god knows. exterior loom was the only one intact. if i used the 1.6 loom i wouldnt have to do the changes i need to do for the cvh know? literally just a swap? i think for the time it will take to swap all the loom over, dropping the fuel tank etc i think i must just do what i need to do and follow the guide, but its so fucking hard to follow lol! |
|
| Author: | - Danny Boy - [ Tue Nov 27, 2012 6:57 pm ] |
| Post subject: | Re: exterior loom |
Yeah you could just swap it over and have no problems at all. Fusebox will have all the right relays ect too then. Its hassle but it will be worth it. The time it will take you to modify this loom and set your car on fire in the process due to wiring it wrong compared to swapping an interior loom over... I know what I would do  It's up to you though really. I'm not saying you WILL set your car on fire, but I will place £1 on it
|
|
| Author: | meilack [ Tue Nov 27, 2012 6:57 pm ] |
| Post subject: | Re: exterior loom |
^  lad
|
|
| Author: | Chris [ Tue Nov 27, 2012 7:02 pm ] |
| Post subject: | Re: exterior loom |
| Author: | elPaulio [ Tue Nov 27, 2012 7:11 pm ] |
| Post subject: | Re: exterior loom |
| Author: | bensouthport [ Tue Nov 27, 2012 7:31 pm ] |
| Post subject: | Re: exterior loom |
thanks Danny, i think im going to bite the bullet and keep the 1.4 loom. in all fairness, i tihnk it would be even worse swapping it as id have to join stuff up in the zetec loom as its cut in places and missing stuff etc. thanks paul. i did end up having the dash out ready to change it over, but then realised it wasnt completely necessary then left the issue of figuring it out to future ben... now its the future from that decision i have to figure it out... damn you past ben... anyway less of this im a loopy cunt talk. if i take my time, and read it 1000 times i should understand it. its just the effort of relocating everything and untangling it all! as long as a make a safe connection and insulate it properly, there should be too much of an issue! looks like this will be fun... |
|
| Author: | - Danny Boy - [ Tue Nov 27, 2012 7:51 pm ] |
| Post subject: | Re: exterior loom |
I'd ask the person who sent you the zetec loom for a refund because you cannot use it. Then go buy a complete loom, sorted
|
|
| Author: | bensouthport [ Tue Nov 27, 2012 8:02 pm ] |
| Post subject: | Re: exterior loom |
haha more money and effort danny! i have a deadline remember! however, ive just thought of a dead good idea... what you doing next week?  haha, been reading it more, starting to understand where i need to look etc now! |
|
| Author: | - Danny Boy - [ Tue Nov 27, 2012 8:07 pm ] |
| Post subject: | Re: exterior loom |
Your mum. The more you read it the more you will understand it I'm sure
|
|
| Author: | bensouthport [ Tue Nov 27, 2012 8:10 pm ] |
| Post subject: | Re: exterior loom |
you bitch. yeah. i have all the kit to do it. just more time. but then again i thought id have to mod the throttle body but i dont so its a win just need a fuel line then i can crack on again.
|
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|