I think this is what the plugs go to, could be wrong as my brain isn't in figure it out mode
| Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
| fuel injector rail wiring https://www.fiesta-si.com/forums/viewtopic.php?f=4&t=24775 |
Page 1 of 4 |
| Author: | bensouthport [ Mon Nov 26, 2012 5:38 pm ] |
| Post subject: | fuel injector rail wiring |
started on this lastnight, replacing some of the tape, checking over the wires etc and just generally seeing if it fitted in the plastic wiring holder that attaches to the back of the inlet. ive come across a few issues so i will post pics and you'll hopefully be able to see what i do... this one is to show the 4 plugs (minus the larger one i to the left) which i believe to be the fuel injector plugs? [img]http://i960.photobucket.com/albums/ae83/ben17southport/20121125_214725.jpg[/img one of the injector plugs? [img]http://i960.photobucket.com/albums/ae83/ben17southport/20121125_214713.jpg[/img im guessing this hooks up to the main engine loom? [img]http://i960.photobucket.com/albums/ae83/ben17southport/20121125_214709.jpg[/img what's the one with the green label on the wire? [img]http://i960.photobucket.com/albums/ae83/ben17southport/20121125_214704.jpg[/img overall shot of the loom [img]http://i960.photobucket.com/albums/ae83/ben17southport/20121125_214654.jpg[/img is this something to do with the egr? [img]http://i960.photobucket.com/albums/ae83/ben17southport/20121125_214624.jpg[/img found this under some shrink wrap that connectors two of the plugs (which i believe to be for the injectors) together. [img]http://i960.photobucket.com/albums/ae83/ben17southport/20121125_214601.jpg[/img any help would be appreciated, and will take me one step further to firing her up. thanks |
|
| Author: | - Danny Boy - [ Mon Nov 26, 2012 6:24 pm ] |
| Post subject: | Re: fuel injector rail wiring |
I think this is what the plugs go to, could be wrong as my brain isn't in figure it out mode
|
|
| Author: | bensouthport [ Mon Nov 26, 2012 7:11 pm ] |
| Post subject: | Re: fuel injector rail wiring |
thanks Danny! doesnt seem to fit too well in the casing so do you think it will be ok left out? you're a star btw 
|
|
| Author: | - Danny Boy - [ Mon Nov 26, 2012 7:26 pm ] |
| Post subject: | Re: fuel injector rail wiring |
As long as all the wires are taped up and not exposed and then the loom tied up so its not flapping around it will be fine yeah. |
|
| Author: | bensouthport [ Mon Nov 26, 2012 7:42 pm ] |
| Post subject: | Re: fuel injector rail wiring |
ok babz thanks. one step out of the way do yo uthink i should add some solder to that connection i have pictured? |
|
| Author: | - Danny Boy - [ Mon Nov 26, 2012 7:49 pm ] |
| Post subject: | Re: fuel injector rail wiring |
If its secure and not going to break just leave it and tape it up
|
|
| Author: | bensouthport [ Mon Nov 26, 2012 8:24 pm ] |
| Post subject: | Re: fuel injector rail wiring |
alright bud will heat shrink wrap i think since i have some lying around. thank youuuu
|
|
| Author: | elPaulio [ Mon Nov 26, 2012 9:13 pm ] |
| Post subject: | Re: fuel injector rail wiring |
Pink one is the oil pressure I think, sure that little push on connector is on the same loom. Other than that, totally agree with all Danny has said. Paul |
|
| Author: | EvilDes [ Mon Nov 26, 2012 11:27 pm ] |
| Post subject: | Re: fuel injector rail wiring |
Pics big enough, you tart? Glad Im not on my phone using data... |
|
| Author: | bensouthport [ Tue Nov 27, 2012 12:10 am ] |
| Post subject: | Re: fuel injector rail wiring |
thanks Paul. should be plugging it in this week so will let you all know how it goes. thanks for spamming my thread you whore |
|
| Author: | EvilDes [ Tue Nov 27, 2012 12:11 am ] |
| Post subject: | Re: fuel injector rail wiring |
Spamming your thread? Fuck you, its a warning to sort out the pic sizes beeyatch! 
|
|
| Author: | bensouthport [ Tue Nov 27, 2012 12:15 am ] |
| Post subject: | Re: fuel injector rail wiring |
well you could have made it more formal....  in my defence, i needed them to be big so people could see the detail i was trying to pin point wont happen again!
|
|
| Author: | EvilDes [ Tue Nov 27, 2012 12:19 am ] |
| Post subject: | Re: fuel injector rail wiring |
In your defence get fucked cock breath! 
|
|
| Author: | - Danny Boy - [ Tue Nov 27, 2012 12:19 am ] |
| Post subject: | Re: fuel injector rail wiring |
800x600 is all you need monkey boy
|
|
| Author: | elPaulio [ Tue Nov 27, 2012 12:24 am ] |
| Post subject: | Re: fuel injector rail wiring |
| Author: | - Danny Boy - [ Tue Nov 27, 2012 12:28 am ] |
| Post subject: | Re: fuel injector rail wiring |
That's because this forum is FUCKING AWESOME! It helps that we are all a close bunch of friends and not just a bunch of forum monkeys like most forums. Plus everyone on here is laid back, even the mods and admin which is always a bonus and no one takes abuse to seriously. What a perfect forum this is
|
|
| Author: | EvilDes [ Tue Nov 27, 2012 12:32 am ] |
| Post subject: | Re: fuel injector rail wiring |
You can get fucked too Its all good, everyone knows Im only messing. Unless Im talking to Ben. |
|
| Author: | - Danny Boy - [ Tue Nov 27, 2012 12:50 am ] |
| Post subject: | Re: fuel injector rail wiring |
Who me? Faaaaaaak orf
|
|
| Author: | meilack [ Tue Nov 27, 2012 9:19 am ] |
| Post subject: | Re: fuel injector rail wiring |
i hate you all xx ben you got owned y0! |
|
| Author: | bensouthport [ Tue Nov 27, 2012 5:51 pm ] |
| Post subject: | Re: fuel injector rail wiring |
you can all suck my cock right now. how do you know i dont take it personally? and that every night i cry myself to sleep because of the abuse i get on here? LOL if i did i wouldnt let you cunts know anyway. now if one more fucker wants to spam my thread shits going to go down |
|
| Page 1 of 4 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|