Wood glue and gaffa tape should do the trick.
How the hell have you forgotten to put it back together?
It only has 3 basic components to it lol - throttle body, ISCV and sandwich plate lol
| Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
| Ho inlet https://www.fiesta-si.com/forums/viewtopic.php?f=4&t=24410 |
Page 1 of 1 |
| Author: | bensouthport [ Fri Sep 14, 2012 5:20 pm ] |
| Post subject: | Ho inlet |
Stupidly i forgot how to put the bloody thing back together! the bolts i have done seem to fit anymore, so must have mixed them up! does anybody have a guide, pictures in detail for me to have a look at? thanks in advance! Ben |
|
| Author: | - Danny Boy - [ Fri Sep 14, 2012 5:28 pm ] |
| Post subject: | Re: Ho inlet |
Wood glue and gaffa tape should do the trick. How the hell have you forgotten to put it back together? It only has 3 basic components to it lol - throttle body, ISCV and sandwich plate lol
|
|
| Author: | bensouthport [ Fri Sep 14, 2012 5:30 pm ] |
| Post subject: | Re: Ho inlet |
yeah the sandwich plate but how do you attach it to the inlet itself? the lugs pop in to the holes, but none of the holes have threads. am i missing something lol? |
|
| Author: | - Danny Boy - [ Fri Sep 14, 2012 8:14 pm ] |
| Post subject: | Re: Ho inlet |
Do the bolts not go through the sandwich place and inlet to hold it all together? |
|
| Author: | - Danny Boy - [ Fri Sep 14, 2012 8:21 pm ] |
| Post subject: | Re: Ho inlet |
Actually the inlet must bolt up to the sandwhich plate, then the whole lot bolts upto the head. |
|
| Author: | bensouthport [ Sat Sep 15, 2012 5:57 pm ] |
| Post subject: | Re: Ho inlet |
exactly. got a few bolts so will try them out. pain in the arse. wish id realised when i got it lol and could have had it sorted early |
|
| Author: | EvilDes [ Mon Sep 17, 2012 8:03 am ] |
| Post subject: | Re: Ho inlet |
This is why your kind shouldn't be working on cars, but arranging flowers, cleaning up, and being the only gay in the village... Muppet - how on earth have you forgotten that. Just piece it together like a jigsaw! That's all cars are, just with nuts and bolts.
|
|
| Author: | bensouthport [ Mon Sep 17, 2012 10:02 am ] |
| Post subject: | Re: Ho inlet |
no idea lol! haha, shut up. its the pissing around and getting the correct sized bolts i need and then getting them that pisses me off lol. |
|
| Author: | bensouthport [ Mon Sep 17, 2012 1:34 pm ] |
| Post subject: | Re: Ho inlet |
Danny you got it right first time, bolts right through the inlet and sandiwhc plate into the head. getting the bolts and 2 nuts i require tomorrow 
|
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|