| Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
| How to fit a MAF/ Air flow sensor https://www.fiesta-si.com/forums/viewtopic.php?f=4&t=2423 |
Page 1 of 1 |
| Author: | kirsty vaughan [ Wed Mar 15, 2006 3:11 pm ] |
| Post subject: | How to fit a MAF/ Air flow sensor |
| Author: | EvilDes [ Wed Mar 15, 2006 3:18 pm ] |
| Post subject: | |
Err, connect it to the air intake pipe and stick the air filter to the other side. Or have you just got the little black box? |
|
| Author: | DanLovesClubbing [ Wed Mar 15, 2006 4:36 pm ] |
| Post subject: | |
I've replaced mine before (the whole MAF unit). Firstly, you unplug the electrical connector by squeezing the metal clips either side and pulling it off. Then, you loosen the jubilee clips at either side of the unit with a screw-driver. you can then slide it out. Fitting is the reverse of removal! |
|
| Author: | kirsty vaughan [ Wed Mar 15, 2006 4:42 pm ] |
| Post subject: | Maf sensor |
Hi, Thanks and yeah it is the whole unit. Thanks that made more sense than the book. Thanks guys, now I've got to do it in the dark, lots of fun.... Kirsty |
|
| Author: | EvilDes [ Thu Mar 16, 2006 9:26 am ] |
| Post subject: | |
| Author: | kirsty vaughan [ Thu Mar 16, 2006 12:44 pm ] |
| Post subject: | MAF sensor fitted |
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|