Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
thermostat housing/temp gauge https://www.fiesta-si.com/forums/viewtopic.php?f=4&t=24026 |
Page 1 of 1 |
Author: | blunty [ Wed May 09, 2012 8:44 am ] |
Post subject: | thermostat housing/temp gauge |
on the zetecs the thermostat housing they have 2 switchs on them and one in the rad.just wondering what the 2 are for on the thermostat housing. also the temp gauge in my car decides to work when it wants to is it the clocks or the temp switch. |
Author: | elPaulio [ Wed May 09, 2012 1:29 pm ] |
Post subject: | Re: thermostat housing/temp gauge |
Hi there, The two on the Zetec are for the temp gauge and the ECU. The one on the top is for the ECU so it knows whether its a cold start or not. The one on the front under the hose is the one for the temp gauge. Sounds like your sensor has gone, I would replace it as its cheap as chips from Ford. Paul |
Author: | blunty [ Thu May 10, 2012 8:56 am ] |
Post subject: | Re: thermostat housing/temp gauge |
cheers for that mate ![]() |
Page 1 of 1 | All times are UTC [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |