| Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
| engine mounts zetec https://www.fiesta-si.com/forums/viewtopic.php?f=4&t=23811 |
Page 1 of 1 |
| Author: | bensouthport [ Wed Mar 07, 2012 10:29 pm ] |
| Post subject: | engine mounts zetec |
I need both mounts for my 2.0l silvertop mondeo engine. Anyone selling any? In terms of were i need to drill in the bay (as i have a 1.4) can sumone post a pic? Ta, ben |
|
| Author: | big g1985 [ Wed Mar 07, 2012 11:35 pm ] |
| Post subject: | Re: engine mounts zetec |
ive got a front one |
|
| Author: | Tonwah [ Thu Mar 08, 2012 1:11 am ] |
| Post subject: | Re: engine mounts zetec |
Shouldn't need to drill anything, all the mk3.5s and most mk3s have the neccessary mounting points you need, as for the mounts tho, you would be fine with just the rear mount |
|
| Author: | bensouthport [ Sat Mar 10, 2012 11:08 pm ] |
| Post subject: | Re: engine mounts zetec |
how much p+p big g? tonwah, does it have to be zetec yeah? i think i might, havent had a look like but hopfully not! |
|
| Author: | Tonwah [ Sun Mar 11, 2012 10:10 am ] |
| Post subject: | Re: engine mounts zetec |
Does what have to be a zetec? You can modify the cvh mount you have to fit, but not much point when Si mounts are easily available and bolt straight on |
|
| Author: | james_rs [ Sun Mar 11, 2012 11:39 am ] |
| Post subject: | Re: engine mounts zetec |
The bracket the holds the rear engine mount is different for a mk3 thats not a zetec. Whn you offer the zetec mount up against where it bolts too, it will become apparent of where the hole needs to drilled. |
|
| Author: | bensouthport [ Sun Mar 11, 2012 7:58 pm ] |
| Post subject: | Re: engine mounts zetec |
so i only need to drill for one engine mount or both front and back? |
|
| Author: | big g1985 [ Sun Mar 11, 2012 10:47 pm ] |
| Post subject: | Re: engine mounts zetec |
£20 posted |
|
| Author: | bensouthport [ Mon Mar 12, 2012 9:36 pm ] |
| Post subject: | Re: engine mounts zetec |
will pm u soon bud once ive checked finances. |
|
| Author: | Jam [ Tue Apr 03, 2012 3:53 pm ] |
| Post subject: | Re: engine mounts zetec |
got a rear one inc the bit that bolts to the block (zetec). i will make sure i haven't launched it in the skip. if its any use to you. |
|
| Author: | bensouthport [ Tue Apr 03, 2012 5:30 pm ] |
| Post subject: | Re: engine mounts zetec |
might well need that jam! ta buddy, let me knwo |
|
| Author: | fiestasiphil [ Thu Apr 05, 2012 7:38 am ] |
| Post subject: | Re: engine mounts zetec |
the only difference between the 1.4 si and 1.6 si is that the 1.4 wont have is the welded bracket on the chassis which is there for extra strength but you dont really need it, early mk3s zetecs didnt have it but if you want it to look genuine i have one 
|
|
| Author: | fiestasiphil [ Thu Apr 05, 2012 7:39 am ] |
| Post subject: | Re: engine mounts zetec |
i also have rear engine mount complete and front engine mount minus crossover bracket |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|