Go to halfords, get a big can of hammerite waxoyl stuff, brush and have fun
I orignally used the spray can stuff, which is good, but the tins will probably last longer in terms of appliance, but thats how I did mine
| Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
| rust proofing https://www.fiesta-si.com/forums/viewtopic.php?f=4&t=23247 |
Page 1 of 1 |
| Author: | A L 3 X [ Tue Oct 25, 2011 4:33 pm ] |
| Post subject: | rust proofing |
I thought you lads might know about this best? not taking the piss btw....but what would be the best method and product to underseal/waxoyl/stonechip a car that hasn't had much done form factory? Cheers |
|
| Author: | DanFraser [ Wed Oct 26, 2011 5:47 pm ] |
| Post subject: | Re: rust proofing |
Strip it back to bare metal, if you think it needs cutting out and a new plate welding in, do it. Then look through the many BIG project threads that feature the rust proofing methods. |
|
| Author: | - Danny Boy - [ Wed Oct 26, 2011 8:00 pm ] |
| Post subject: | Re: rust proofing |
Go to halfords, get a big can of hammerite waxoyl stuff, brush and have fun I orignally used the spray can stuff, which is good, but the tins will probably last longer in terms of appliance, but thats how I did mine
|
|
| Author: | A L 3 X [ Thu Oct 27, 2011 3:24 am ] |
| Post subject: | Re: rust proofing |
Nah its an import Dan so none as standard....but also absolutely no spot of rust as far as I can see, just need something to stop it getting rusty? N ahh i see, i have tried the spray can waxoyl danny, but heard it needs doing more than once? And i found after spraying it on it was really easy to remove by accident haha |
|
| Author: | Petrol [ Thu Oct 27, 2011 4:38 am ] |
| Post subject: | Re: rust proofing |
my grandad swears by having crude oil sprayed into the seams and sills, nice and plentyful, it sticks and no water will pass it, even if its the oil from your next oil change, clean oil wont stick and then plenty of underseal, hammerite stuff is cheap enough and its like tar (literally) takes a good wack from a stone to even chip it away any rust should be ground back untill its completely shiney, if impossible to grind back must be cut out till no rust remains and new metal welded in |
|
| Author: | - Danny Boy - [ Thu Oct 27, 2011 7:17 pm ] |
| Post subject: | Re: rust proofing |
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|