| Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
| hubs https://www.fiesta-si.com/forums/viewtopic.php?f=4&t=22275 |
Page 1 of 1 |
| Author: | blunty [ Sun May 08, 2011 12:26 pm ] |
| Post subject: | hubs |
just wondering if any knows if the 1.1 hubs are the same as the 1.6 |
|
| Author: | Tonwah [ Sun May 08, 2011 1:12 pm ] |
| Post subject: | Re: hubs |
Depends on year and if they have power steering or not |
|
| Author: | blunty [ Sun May 08, 2011 4:14 pm ] |
| Post subject: | Re: hubs |
well i have a n reg si and a m reg 1.1 the si had power steering and the 1.1 dont |
|
| Author: | seanny 94 si [ Sun May 08, 2011 9:57 pm ] |
| Post subject: | Re: hubs |
they wont fit and it also depends on the size of the driveshaft nut. 30mm or 32mm aswell as one having power steering and the other don't |
|
| Author: | blunty [ Tue May 10, 2011 5:31 pm ] |
| Post subject: | Re: hubs |
the hub nut size on the 1.1 is 32mm and the si is 32mm |
|
| Author: | Tonwah [ Wed May 11, 2011 8:57 am ] |
| Post subject: | Re: hubs |
1989-1993 had the 30mm hub nut 1994-1996 had the 32mm hub nut regardless of what model 1989-1993 had the smaller diameter shockabsorber 1994-1996 had the larger diameter shockabsorber by 0.6mm depending on what model the hub came off and if it had power steering or not, there are 2 different size ball joint holes (14mm and 16mm), and the xr2i 16v with p/s had a cone shape ball joint 16mm lower and 14mm higher (same as on the 1.7 pumas) you might find that your hub off the 1.1 will fit the 1.6 si, worth a try if your able to do it yourself |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|