Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
spring compressor https://www.fiesta-si.com/forums/viewtopic.php?f=4&t=22109 |
Page 1 of 1 |
Author: | bensouthport [ Wed Apr 13, 2011 11:32 am ] |
Post subject: | spring compressor |
do i need them to fit coilovers and remove my old suspension? thanks |
Author: | big g1985 [ Wed Apr 13, 2011 11:52 am ] |
Post subject: | Re: spring compressor |
no as with the coilovers all you do is wind down the collor so the spring is loose if you want to take the springs off the old suspension safely then yes you will need a set |
Author: | bensouthport [ Wed Apr 13, 2011 12:03 pm ] |
Post subject: | Re: spring compressor |
ahh right okay, so even building the coilovers back up, all i need is the collar to compress them? |
Author: | big g1985 [ Wed Apr 13, 2011 3:45 pm ] |
Post subject: | Re: spring compressor |
yup just wind it up on the collor |
Author: | bensouthport [ Wed Apr 13, 2011 4:15 pm ] |
Post subject: | Re: spring compressor |
sweet nice one! need copper grease to help me along though because some are completely dry, won't budge having trouble building them up trying to figure out where what goes. any sites with instructions or owt? |
Author: | big g1985 [ Wed Apr 13, 2011 4:20 pm ] |
Post subject: | Re: spring compressor |
post a pic up of the bits |
Author: | bensouthport [ Wed Apr 13, 2011 4:23 pm ] |
Post subject: | Re: spring compressor |
alright mate give us one sec |
Author: | bensouthport [ Wed Apr 13, 2011 4:40 pm ] |
Post subject: | Re: spring compressor |
pretty sure the ones nearest to the wall are for the rear, and the ones closest to us are for the front. its just the other bits, two have gaps in, two dont? ![]() ![]() |
Author: | bensouthport [ Wed Apr 13, 2011 6:48 pm ] |
Post subject: | Re: spring compressor |
BUMPPP |
Author: | will121 [ Wed Apr 13, 2011 7:50 pm ] |
Post subject: | Re: spring compressor |
top ones for the rear, bottom ones front. rear ones have split coller as the shock top is fixed on, fronts dont need a split coller as built upwith bolted top |
Author: | bensouthport [ Wed Apr 13, 2011 8:06 pm ] |
Post subject: | Re: spring compressor |
thanks will, big help! |
Page 1 of 1 | All times are UTC [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |