im on -60mm drop 195/45 15 with 5mm spacers and ........ i rub on full lock
| Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
| will i need spacers? https://www.fiesta-si.com/forums/viewtopic.php?f=4&t=21715 |
Page 1 of 1 |
| Author: | stuff n that [ Thu Feb 17, 2011 11:43 pm ] |
| Post subject: | will i need spacers? |
any 1 know if 15" 7j ET30 wheels with 195 50 15 tyres will fit without spacing? |
|
| Author: | stuff n that [ Thu Feb 17, 2011 11:45 pm ] |
| Post subject: | Re: will i need spacers? |
forgot to mention the car is not lowerd atm but will be approx 40mm soon |
|
| Author: | Tiababy [ Fri Feb 18, 2011 11:52 am ] |
| Post subject: | Re: will i need spacers? |
On my old 1.4si I had 195 55 15's on and it run on them but it wasn't lowered and scrubbed a lot on almost full lock. The tyres on the orange one when I brought it where 195 (50+ will double check) 15 and they scrubbed going over bumps, full lock etc and the car visibly looks lowered by around 30mm but again you could run the car on them without spacers if you could live with the scrubbing. Personally my tyres are 195 45 15s as I can use these with absolutely no scrubbing occurring. |
|
| Author: | si-george [ Sat Feb 19, 2011 4:48 am ] |
| Post subject: | Re: will i need spacers? |
im on -60mm drop 195/45 15 with 5mm spacers and ........ i rub on full lock
|
|
| Author: | The Loumiester [ Sat Feb 19, 2011 12:28 pm ] |
| Post subject: | Re: will i need spacers? |
195/45 is your best bet, I had 195/50 and they scrubbed on full lock, not sure what my cars lowered by. |
|
| Author: | stuff n that [ Sat Feb 19, 2011 1:59 pm ] |
| Post subject: | Re: will i need spacers? |
cheers for the info every 1, im not too botherd about them scrubbing on full lock cos the wheels will only be used on track, i wanna use 195 50 15 cos thats the only size you can get yoko parada in for 15's |
|
| Author: | 95 Fiesta Si [ Sat Feb 19, 2011 2:03 pm ] |
| Post subject: | Re: will i need spacers? |
Si standard is ET40 so ET30 will push them away from the stuts and towards the arches so as long as there clearing them after being lowered and cant see it being a problem |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|