pop em off with your fingers or a screwdriver or something, don't see why they wouldn't fit they both seem the same as i've replaced both on each car before.

_________________

The repeater is clipped in so to get it off you have to push it to one side and it will pop out, the only issue is that they are attached with a glue or stuck after so much time that if they are originals and haven't been changed you (or at least I had to on mine) use a screw driver or anything flat to pry the damn things off the panel before you can even get to the clip. You have to be really carefull not to scratch the paint work when you do it other than that its an easy job. I know because I was able to do it

_________________

Zs ones just clip in without hassle. So should be easier, to refit ::) I had the same prpblem.with my si

_________________

Use some fishing line like dental floss so you don't scratch your paintwork with a screwdriver to get the adhesive to seperate.

_________________


Quote Clarkson, Top Gear, 17th July: "I'm not having a stroke... just driving a Nissan!"
Quote Ry, Mallory Park, 3rd Dec: "Ahhhh crap... Just a bit too over eager really!"
"I used to be an adventurer like you, but then I took an arrow in the knee"