Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
1.4 and 1.6 engine mounts - CONFUSED https://www.fiesta-si.com/forums/viewtopic.php?f=4&t=20429 |
Page 1 of 1 |
Author: | bensouthport [ Tue Aug 24, 2010 12:37 am ] |
Post subject: | 1.4 and 1.6 engine mounts - CONFUSED |
i've heard lots of different things about what can fit into what. i have heard that the 1.6 will fit a 2.0 mondy but a 1.4 won't, but it will fit the RS turbo. but ive been told by a chap i know who's very good with his cars and has owned an si before told me the 1.4 will fit the mondy? i may have misunderstood him but could someone clear this up for me please? thanks, ben |
Author: | DarrenFsi [ Tue Aug 24, 2010 12:42 am ] |
Post subject: | Re: 1.4 and 1.6 engine mounts - CONFUSED |
its not that it wont fit bud its jus the 1.6 is a silvertop and so is the 2.0 mondy lump so the engine mounts are bang on in a 1.4 si the engine is a cvh so the engine mounts are there for an rs turbo lump as that is a cvh engine aswel hope that cleared things up ![]() i think im right on the cvh part ![]() |
Author: | SI BEN [ Tue Aug 24, 2010 1:03 am ] |
Post subject: | Re: 1.4 and 1.6 engine mounts - CONFUSED |
Yea the 1.4 is a cvh and the 1.6 a zetec. I suppose its just different engine so different size and shape but a 2.0 will go in the 1.4 just a bit more to fiddle with |
Author: | bensouthport [ Tue Aug 24, 2010 1:12 am ] |
Post subject: | Re: 1.4 and 1.6 engine mounts - CONFUSED |
so it will definetely work? i mean the guy is very good so i know he can sort it for me lol ![]() ![]() |
Author: | stainlessmole [ Tue Aug 24, 2010 11:01 am ] |
Post subject: | Re: 1.4 and 1.6 engine mounts - CONFUSED |
You will need to change your engine mounts to 1600si ones for the 2.0 conversion basically |
Author: | bensouthport [ Tue Aug 24, 2010 11:33 am ] |
Post subject: | Re: 1.4 and 1.6 engine mounts - CONFUSED |
so i will have to change the mounts? ahh, so confusing ![]() |
Author: | DarrenFsi [ Tue Aug 24, 2010 12:56 pm ] |
Post subject: | Re: 1.4 and 1.6 engine mounts - CONFUSED |
please dont take the cvh mounts out and put zetec mounts in for a mondy lump if the cvh mounts allow you to fit a cvh turbo lump then i know which route id be goin ![]() ther the same power standard but the cvh offers more tuning potential and because its a turbo the rewards for mods are good ![]() my 2litre has stage 2 head, kent cams?, rs1800 head, decat exhaust and a chip with remap and is only pushing 150 ish as the standard ford inlet manifolds are restrictive to reach any more power i would have to go throttle bodies or carbs and would need different management then |
Author: | bensouthport [ Tue Aug 24, 2010 3:04 pm ] |
Post subject: | Re: 1.4 and 1.6 engine mounts - CONFUSED |
true but i know the turbo poses a lot of trouble! and at this stage in my life and being 18, i would be perfectly happy to keep my 1.4, buy a 1.6 and do the 2.0 conversion, keep the 1.4 as a runabout and then when i have set my foundations with a salary i would do the turbo route ![]() because these were my original plans |
Author: | DarrenFsi [ Tue Aug 24, 2010 4:00 pm ] |
Post subject: | Re: 1.4 and 1.6 engine mounts - CONFUSED |
the insurance doesnt have to know lol but ur policy will be invalid ![]() end of the day its ur car ur choices i was merely suggestin the turbo route as it would be different to the 2litre mondy norm you can keep the boost low and jus run it standard or you could make a zvh n/a screamer ![]() |
Author: | The Loumiester [ Tue Aug 24, 2010 4:24 pm ] |
Post subject: | Re: 1.4 and 1.6 engine mounts - CONFUSED |
honestly if you want a 2.0 just sell your 1.4 and you'd get a 1.6 for similar money then stick the 2.0 lump with alot less hassle (and save money if your paying someone to do the work). plus with the 1.6 you get the the wingbacks. I can understand you not wanting to get rid of your car due to us all loving our pride and joys but if saving money and makin life easier is your priority then get looking at 1.6's. and one more thing i think the 1.6 gearbox is longer ratio than the 1.4 so should be better for the extra power, some people even think the 1.6 is too short and go 1.8, just something for you to think about ![]() |
Author: | bensouthport [ Wed Aug 25, 2010 7:16 pm ] |
Post subject: | Re: 1.4 and 1.6 engine mounts - CONFUSED |
lmao, so many decisions! and i thought working in subway was bad... i think i might do both darren ![]() loumeister, thanks for clearing some stuff up for me mate. i think i will do that, but i really do want to keep my 1.4 ![]() thanks |
Author: | The Loumiester [ Wed Aug 25, 2010 8:20 pm ] |
Post subject: | Re: 1.4 and 1.6 engine mounts - CONFUSED |
Sounds good to me. |
Page 1 of 1 | All times are UTC [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |