| Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
| how hard is it to get these to fit my car https://www.fiesta-si.com/forums/viewtopic.php?f=4&t=19943 |
Page 1 of 1 |
| Author: | ChEzNy_91 [ Thu Jun 17, 2010 1:14 pm ] |
| Post subject: | how hard is it to get these to fit my car |
viewtopic.php?f=10&t=19757 onto my 1.6 si /:) |
|
| Author: | DarrenFsi [ Thu Jun 17, 2010 2:11 pm ] |
| Post subject: | Re: how hard is it to get these to fit my car |
the disc needs spacing out bout 3mm and the bolt holes need drilling out a lil cant remember wot to tho. try the fiesta ST setup bolts straight on and they are newer so should be better plus no hassle spacing or drilling  ther around the 150 mark if you can find any try stoc apparently |
|
| Author: | Rob_88 [ Thu Jun 17, 2010 3:14 pm ] |
| Post subject: | Re: how hard is it to get these to fit my car |
as said you need to drill the holes and stuff out, i think they would be 260mm aswell. better off with the 280mm ST set or the sierra cosworth 4x4 280mm set. i have the cossy brakes and all i had to do was space the wheel out 6mm (can get spacers anywhere £10-£20) but ST ones are straight swap. Dont forget you need at least 15" wheels 
|
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|