| Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
| XR2i 8v Injector Fault https://www.fiesta-si.com/forums/viewtopic.php?f=4&t=19723 |
Page 1 of 1 |
| Author: | XR2i_Alex [ Wed May 26, 2010 9:42 pm ] |
| Post subject: | XR2i 8v Injector Fault |
Evening all, Long story cut chort, I bought a new engine seeing as my old bottom end went, i have put the new engine in using the old manifolds and sensors etc, for some reason i have no fuel going into the engine. I have fuel pressure up to the fuel rail and i can hear the pump priming, but i when i turn the key, fuel does pump through to the combustion chamber, it ran just before i took the engine out. I'm running out of ideas now. HELP ME PLEASE!!!!! |
|
| Author: | XR2i_Alex [ Thu Jun 03, 2010 4:58 pm ] |
| Post subject: | Re: XR2i 8v Injector Fault |
Found out that i have no spark as well. I have tried a new crank sensor cos i heard that maybe the issue. It's got a Sigma SG20 immobiliser on it and that seems to be working ok. I just put a new engine and have made sure everything is all plugged in as per how it shoould be but whenever i go to start the car it has no spark or fuel going in. A guy i used t work with reckons i may have either ruined the Ignition module on the bulkhead or fried the ecu. Is this possible? |
|
| Author: | onslack [ Fri Jun 04, 2010 9:47 am ] |
| Post subject: | Re: XR2i 8v Injector Fault |
hi alex, i have never had experience with an 8v 2i i's try the edis module as i think that also controls the firing on the 8v's, you tried another cps? not sure what else to suggest really, you 100% sure its not your imob? |
|
| Author: | james_rs [ Fri Jun 04, 2010 9:15 pm ] |
| Post subject: | Re: XR2i 8v Injector Fault |
Got the fuel lines (in/out) round the right way? |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|