Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
wishbones https://www.fiesta-si.com/forums/viewtopic.php?f=4&t=19490 |
Page 1 of 1 |
Author: | dawnrs [ Mon Apr 26, 2010 7:58 pm ] |
Post subject: | wishbones |
can some one tell me if fiesta rs wishbones are any different to mk3 fiesta wishbones? i've been looking on ebay and the price difference is huge ![]() ![]() ![]() |
Author: | Mattyboy Esq [ Wed Apr 28, 2010 10:52 am ] |
Post subject: | Re: wishbones |
I don't believe so, the only difference will be PAS/Non PAS. |
Author: | Tiababy [ Thu Apr 29, 2010 12:25 am ] |
Post subject: | Re: wishbones |
Author: | dawnrs [ Thu Apr 29, 2010 7:42 am ] |
Post subject: | Re: wishbones |
Author: | Tiababy [ Thu Apr 29, 2010 12:21 pm ] |
Post subject: | Re: wishbones |
well it looks as if wishbones aren't all the same. Bulletpoint form what he is saying about the wishbones are Non PAS and PAS are different Does it have a straight or stepped ball joint? Has it got a straight or offset end (the part that goes to the hub I presume)? I found it easier to just buy wishbones from another Si. This is probably why the garage told me to buy the wishbones then they would fit them ![]() |
Author: | dawnrs [ Thu Apr 29, 2010 6:26 pm ] |
Post subject: | Re: wishbones |
Author: | Jam [ Thu Apr 29, 2010 9:11 pm ] |
Post subject: | Re: wishbones |
according to the blurb the RS ones are slightly different again..because it came lower from the factory the arm is slightly shorter to reduce the negative camber introduced when lowering ![]() |
Author: | dawnrs [ Fri Apr 30, 2010 3:03 pm ] |
Post subject: | Re: wishbones |
the motor factors where i got them from did ask the reg: so will find out tom when there fitted if there the rights one or not ![]() but gonna b ![]() ![]() ![]() |
Page 1 of 1 | All times are UTC [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |