yeah man sure other people could help aswell
| Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
| Good old RUST! https://www.fiesta-si.com/forums/viewtopic.php?f=4&t=19068 |
Page 1 of 3 |
| Author: | bensouthport [ Tue Mar 02, 2010 7:48 pm ] |
| Post subject: | Good old RUST! |
noticed some on the bottom of several of the arches. not too severe. and the bottom corner of my door. came back from college today, thought id have a quick gadge before i went crazy on cod and there seems to be a slight rust problem just under the skirts. paint cracking off etc. anyway to tackle this (a rust based liquid paint etc) or is it a simple repair of the skirts? i also know its common for rust on the arches and they will need repairing and i am planning on doing that soonish, just want to keep it alright till then. thanks |
|
| Author: | Elward [ Tue Mar 02, 2010 7:56 pm ] |
| Post subject: | Re: Good old RUST! |
if its straight forward rust then grind/sand rust treater then slap some hammerite or something over the top wont come back for a few years then haha as for cracked paint could buy a touch up pen with filler if not to bad and just build it up layer by layer then add colour, or if its a big bit then its gonna be needed to be sanded flat and sprayed |
|
| Author: | bensouthport [ Tue Mar 02, 2010 8:39 pm ] |
| Post subject: | Re: Good old RUST! |
i have a 150ml ford ash black pearl hycote spraypaint. if i whack some pictures on tomorrow could you tell us whether its a simple sand down and spray? thanks man |
|
| Author: | Elward [ Tue Mar 02, 2010 9:22 pm ] |
| Post subject: | Re: Good old RUST! |
yeah man sure other people could help aswell
|
|
| Author: | TANGO [ Tue Mar 02, 2010 9:44 pm ] |
| Post subject: | Re: Good old RUST! |
yes mate throw us some pics up and will be able to advice the best course of action!! |
|
| Author: | The Loumiester [ Tue Mar 02, 2010 10:48 pm ] |
| Post subject: | Re: Good old RUST! |
i might jump in and show my lovely rust patches in compitition lol |
|
| Author: | bensouthport [ Tue Mar 02, 2010 11:11 pm ] |
| Post subject: | Re: Good old RUST! |
i'm sure i could give you a run for your money? however i could be mistaken since ive only seen two si's round my area and have never had the opportunity to inspect them! but thanks very much  lending my sisters camera since i cant find my charger so after college tomorrow il get a few cheeky snap shots and wing them on here
|
|
| Author: | Elward [ Wed Mar 03, 2010 12:14 am ] |
| Post subject: | Re: Good old RUST! |
what i done on one of my arches is just grind it on a angle took the whole arch lip back to bare metal then re-sealed it |
|
| Author: | bensouthport [ Wed Mar 03, 2010 12:18 am ] |
| Post subject: | Re: Good old RUST! |
how did you re seal it? is that the whole arch lip or just the part that is parallel to the ground if you get my drift? if not il explain in the pics when i post them tomorrow. but if you're talkin about what i think you are then that wud be perfect as on the rear, the arch lip digs into my tires when i have a full car, il also show pics of that! |
|
| Author: | Elward [ Wed Mar 03, 2010 12:41 am ] |
| Post subject: | Re: Good old RUST! |
yep the lip that is tucked up i had stupid knobbly bits so i just hacked it with the grinder as i could see it was getting worse just need to do the other arch its weird my rear ones need doing but the fronts are fine 
|
|
| Author: | bensouthport [ Wed Mar 03, 2010 12:50 am ] |
| Post subject: | Re: Good old RUST! |
haha yeh i know what you mean how did you seal that like? i still have some on the circular lip going right round the arch. not terrible but i can see it getting worse in the future. ive been told i can bash them in but that will crack the paint n make it rust where people can see it! ahh well. il jst put it down to ppls advice tomorrow with the pics. ta elward |
|
| Author: | Elward [ Wed Mar 03, 2010 12:53 am ] |
| Post subject: | Re: Good old RUST! |
a quick tip if your gonna bash it, use a rubber mallet or copper mallet and heat the area up with a hairdryer what i done was grind it back with the grinder, slap some kurust on for good measure left it for a few hours wiped if off and masked it up and sprayed it with red hammerite, obviously if its gonna be showing seal it with some sort of sealer and use proper colour spray
|
|
| Author: | bensouthport [ Wed Mar 03, 2010 12:57 am ] |
| Post subject: | Re: Good old RUST! |
im guessing you have bashed yours in? yeh av got the spray to do the trick and that. if i think i wont fcuk it up il give it a go, if that il get it sorted when i get my respray done. ta pal |
|
| Author: | Elward [ Wed Mar 03, 2010 12:59 am ] |
| Post subject: | Re: Good old RUST! |
theres not much to cock up its pretty easy yeah bashed mine a few time but it kept popping back out looks like if its caught something im gonna be doing alot of work come saturday ill take some pics need something to do while im waiting for my skirts and arches to bond haha |
|
| Author: | bensouthport [ Wed Mar 03, 2010 1:03 am ] |
| Post subject: | Re: Good old RUST! |
ahh laughs yeh n i can use them pics as a cheeky tutorial. yours looks like an xr2i from here. guessing its a replica?
|
|
| Author: | Elward [ Wed Mar 03, 2010 1:16 am ] |
| Post subject: | Re: Good old RUST! |
yeah replica was poverty spec bumpers rather low on 15 dished wheels now im going down the rep route with rather wide capri wheels haha |
|
| Author: | bensouthport [ Wed Mar 03, 2010 1:33 am ] |
| Post subject: | Re: Good old RUST! |
sounds tidy man! have em white too! got a red xr2i round with white escort wheels i think, look bang on. you just 18 too? |
|
| Author: | bensouthport [ Wed Mar 03, 2010 1:35 am ] |
| Post subject: | Re: Good old RUST! |
you not gona rivet your skirts either? |
|
| Author: | Elward [ Wed Mar 03, 2010 1:55 am ] |
| Post subject: | Re: Good old RUST! |
yeah im only 18 my wheels are ford graphite grey with rs centrecaps nah i was gonna chuck self tappers but a boy on another forum tigersealed his ZS skirts onto his mk4 and he said they were fine even in triple figure speeds and my car doesnt go that fast haha but im using sikaflex which is stronger than tigerseal again
|
|
| Author: | bensouthport [ Wed Mar 03, 2010 11:30 pm ] |
| Post subject: | Re: Good old RUST! |
you seem pretty mechanically sound minded for that age! im 18 too like, guess im just at early stage  will have to do the pics tomorrow. took them before, just cant find the cable! |
|
| Page 1 of 3 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|