| Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
| mk3 zetec air box problem https://www.fiesta-si.com/forums/viewtopic.php?f=4&t=17568 |
Page 1 of 1 |
| Author: | Fizzy T [ Fri Sep 11, 2009 11:08 pm ] |
| Post subject: | mk3 zetec air box problem |
I seem to be missing a bracket or something to bolt in the airbox so currently its held in with cable ties lol Does anyone have pics of the airbox mounted on the bracket? |
|
| Author: | mattu101 [ Sat Sep 12, 2009 10:30 am ] |
| Post subject: | Re: mk3 zetec air box problem |
From my experience (very little) the air box is held on by cable ties and then the rubber 'shoes' provide its location, same on my mk3 and mk4. |
|
| Author: | onslack [ Sat Sep 12, 2009 2:07 pm ] |
| Post subject: | Re: mk3 zetec air box problem |
shit pic's, but the only ones i seem to have    you can just make out the bracket next to the battery tray you can see the little rubber bung, the air box has a little sticky out thing at the back which locates in there and then it is bolted down with an 8/10mm bolt at the front by the water hose |
|
| Author: | happypaul [ Sun Sep 13, 2009 12:36 pm ] |
| Post subject: | Re: mk3 zetec air box problem |
Terry is correct, although I did run my last one without the bracket, it was alright lol |
|
| Author: | Fizzy T [ Mon Sep 14, 2009 12:21 am ] |
| Post subject: | Re: mk3 zetec air box problem |
Figured out where the bracket goes today before i saw the replies here,I found my xr2i's bracket in the garage and thought Aaaaaaaah that bastard lol The mk3.5 1.1 shell I have used though doesnt have the 4 threaded holes for the bolts to go through though so oh well cable ties FTW! |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|