Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
More Problems... lol https://www.fiesta-si.com/forums/viewtopic.php?f=4&t=12052 |
Page 1 of 2 |
Author: | mattjk88 [ Mon Jul 07, 2008 12:10 am ] |
Post subject: | More Problems... lol |
Right sorry about this fellas! Temperature gauge spontenously going up and down - Faulty temparature sensor? Well yeah but even when the needle was showing cold the fan was still kicking in??? (does the car have 2 temp sensors - one for the dash and one for the fan?) I recently changed the thermostat because that was faulty but this happening a few days later seems too much of a coincidence!!! Also the needle wasn't showing fully cold just above the white block on the dash then suddnly it would shootup (never went too the fully cold mark) I assume the temp sensor is the pointing upwards out of the thermostat housing correct or is it the sensor at the bottom? Thanks |
Author: | happypaul [ Mon Jul 07, 2008 12:52 am ] |
Post subject: | Re: More Problems... lol |
One temp sensor on top of thermostat and one under it (cant remember which one controls the dash clocks tho), fan is controlled with the temp sensor on the side of the raf ![]() |
Author: | mattjk88 [ Mon Jul 07, 2008 8:55 am ] |
Post subject: | Re: More Problems... lol |
Cool thanks Paul, Just need to know which one it is in the thermostat housing now,... Anyone?? ![]() |
Author: | sisisisi [ Mon Jul 07, 2008 10:25 am ] |
Post subject: | Re: More Problems... lol |
its the one on the bottom that controlles the guage m8 |
Author: | mattjk88 [ Mon Jul 07, 2008 10:53 am ] |
Post subject: | Re: More Problems... lol |
Thanks mate you a legend, whats the top one for then? |
Author: | DANIELP1991 [ Mon Jul 07, 2008 10:59 am ] |
Post subject: | Re: More Problems... lol |
fan?? |
Author: | mattjk88 [ Mon Jul 07, 2008 11:01 am ] |
Post subject: | Re: More Problems... lol |
Thats what I orginally thought but apperently thats on the rad, seems odd that such an old car has 3 different teperature sensors on it! |
Author: | happypaul [ Mon Jul 07, 2008 11:07 am ] |
Post subject: | Re: More Problems... lol |
They also have an air temp sensor on back of inlet ![]() |
Author: | mattjk88 [ Mon Jul 07, 2008 11:11 am ] |
Post subject: | Re: More Problems... lol |
Lol ok 3 water temp sensors, whats the top one for then guys??!! Im gunna try cleaning up the contacts on the bottom one tonight as its very on and off which would suggest a dirty contact |
Author: | rotti [ Mon Jul 07, 2008 4:04 pm ] |
Post subject: | Re: More Problems... lol |
Sorry to hijack your post mate but where should the needle sit if everything is working ok? |
Author: | mattjk88 [ Mon Jul 07, 2008 4:20 pm ] |
Post subject: | Re: More Problems... lol |
Once it reaches operating temp it should stay around NO in the NORM |
Author: | rotti [ Mon Jul 07, 2008 4:42 pm ] |
Post subject: | Re: More Problems... lol |
hmmmm. Mine rarely gets above the bottom white line, not sure if that means anything but at least I know. Thanx mate. ![]() ![]() |
Author: | mattjk88 [ Mon Jul 07, 2008 5:22 pm ] |
Post subject: | Re: More Problems... lol |
Author: | rotti [ Mon Jul 07, 2008 5:50 pm ] |
Post subject: | Re: More Problems... lol |
Author: | sisisisi [ Mon Jul 07, 2008 6:51 pm ] |
Post subject: | Re: More Problems... lol |
ok 1. the sensor in the rad is for the fan (fan switch) 2. the sensor on the bottom of the stat is for the clocks temp guage and the one on the top of the stat goes to the ecu to let it know when the stat is open or closed and prob some other technical poo but thats about it ok guys |
Author: | mattjk88 [ Mon Jul 07, 2008 6:53 pm ] |
Post subject: | Re: More Problems... lol |
Minty mint, thanks |
Author: | sisisisi [ Mon Jul 07, 2008 6:55 pm ] |
Post subject: | Re: More Problems... lol |
we happy now ![]() |
Author: | mattjk88 [ Mon Jul 07, 2008 7:00 pm ] |
Post subject: | Re: More Problems... lol |
I wont be fully happy til your GF comes round later matey! ![]() ![]() ![]() |
Author: | sisisisi [ Mon Jul 07, 2008 7:07 pm ] |
Post subject: | Re: More Problems... lol |
is there any fuckin need for that prick |
Author: | sisisisi [ Mon Jul 07, 2008 7:09 pm ] |
Post subject: | Re: More Problems... lol |
u try to help out someone and then they become sarcastic and rude how imature wanker |
Page 1 of 2 | All times are UTC [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |