hi, on my Si iv got some rs2000 alloys with 195/50 15 tyres on them and they are rubbing abit when i go on full lock, i was thinking of sticking some spacers on to stop the rubbing but will this make a difference to the wheels nuts, cause obv if i stick 5mm on im gonna be losing 5mm of thread?
any help would be much appreciated
thanks

i had 5mm spacers when i had 16" and never had any probs

Try 3mm, should be enough and yes you will lose thread, but if the wheel nuts are torqued up properly it will be fine

_________________

When you next change your three, go for 195/45 that will be much better. I think everyone has suffered scrubbage of 195/50 as thats what used to be on mine, and that scrubbed alot until I changed them.

Yeah 5mm on 16's is fine man
It's when you start going 10mm that you need to change the stud length

_________________

She's still alive! -23/02/2017

just go 3mm unless your not too low / or have rolled arches

_________________
Daily isn't so Special. And it makes me sad.
Need space and time and I'll crack on with Jams si!

Catch me on Facebook as I'm rarely on here.