Hey guys, i posted in the mods forum the other day about some alloys i was going to buy. The spacing on them is fine but imsure most of you know that the fiesta has small studs that are meant for steel wheels.

When i put the alloys on the nut will not go onto the end of the stud and there is not enough thread coming through because the alloys are obviously thicker.

Anybody know what i can buy and how much? and if you can get them in black then thats a bonus.

A link to a buying page would be great.

Thanks in advance.

by the sounds of it you need longer wheel studs

pass ask jam

Hes got a PM waiting

you can buy longer ones from ford but im unsure what car they are off, or search on google for f2 stock car wheel studs, they have a choice of 25mm, 35mm or 45 mm, 35mm should be more than adiquate, as for fitting them, use a copper mallet and not the old ones out, and use it again to knock the new ones through from the back, some dismatling is required of the front brakes, but its straight forward