Hey guys its been a while since posting here,
have had trouble with my rs1800 lump since the cam belt broke some time ago, many people suggested that i may have slightly damaged a couple of valves. car runs rich and has low compressions on pistons 1 and 3 and realy stinks of petrol (no fuel leaks found ) all this is mentioned in another thread somewhere..
anyways
i bought an rs1800 head off of sisisisi (although its been over a month and it still hasn't arrived

)
my current injector rail is fitted with an FSE boost valve adaptor to the fuel pressure regulator hole (the old return pipe is blocked off), however i want to remove this sell it and go back to standard fuel pressure regulation, however i cant seem to get the old fuel pressure regulator back in the hole it just pisses out fuel everywhere so i am stuck with the fse thing untill i get another injector rail with the ford fuel pressure regulator intact, i was just wondering if an injector rail off a 1.6 fsi or escort engine would be the same as the rs1800 i'm wondering if the injectors are the same size and if i can get away with grabbing one from the breakers yard and doing a straight swap (well putting the rs1800 injectors in as well) when i finally get the head and swap it over.
does anyone know if all zetec fuel rails are the same?? thanks in advance